Abstract:Inverse opal ceria (CeO2) films and powders, exhibiting three-dimensional ordered macroporous (3DOM) structures and a photonic band gap (PBG) in the visible region, were successfully fabricated using the colloidal crystal template approach. Colloidal crystals templates, comprising polymethylmethacrylate (PMMA) spheres of diameter similar to 325 nm arranged on a face-centered cubic (fcc) lattice, were prepared by self-assembly from aqueous colloidal suspensions of PMMA spheres. After drying, the interstitial spaces in the PMMA colloidal crystals were filled with a ceria sol-gel precursor, and then the resulting structure calcined at 400 degrees C to remove the polymer template. The ceria inverse opals obtained were characterized by SEM, XRD, BET, porosity, and UV-vis transmittance measurements and showed fcc ordering of macropores (diameter around 240 nm) within a CeO2 nanocrystal matrix. The CeO2 volume fraction in the inverse opals was 17-18 vol %, and its surface area was 51 m(2) g(-1). Both the PMMA colloidal crystals and CeO2 inverse opals. behaved as 3-dimensional photonic crystals, with PBGs at 877 and 485 nm, respectively. Filling the macropores of the CeO2 inverse opal with solvent caused a redshift in the position of the PBG, with the magnitude of the shift being directly proportional to the refractive index of the. solvent. Refractive index sensing with a sensitivity of n = 0.001 or better is achievable using inverse opal CeO2 thin films. Inverse opal CeO2 Powders showed improved thermal stability at 800 degrees C compared to non-networked ceria nanoparticles of similar initial crystallite size and surface area, suggesting that inverse opal architectures may be useful in applications where retention of large surface area during high temperature operation is important (e.g., heterogeneous catalysis).

Colloidal crystals as templates for zinc sulfide inverse opal via solvothermal approach

Solvothermal Synthesis of 3D Photonic Crystals Based on ZnS/opal System

Fabricate Photonic Crystals Based on ZnS/opal System Via Solvothermal Method

Preparation and Characterization of Nanocrystalline ZnS/ZnO Doped Silica Inverse Opals

Preparation and Characterization of Ferroelectric Inverse Opal Via a Sol-Gel Process

Fabrication of Inverse Opal Via Ordered Highly Charged Colloidal Spheres

Structural and optical characterization of 3D binary colloidal crystal and inverse opal films prepared by direct co-deposition

Synthesis Of (Pb,La)(Zr,Ti)O-3 Inverse Opal Photonic Crystals

Photonic Band Gap In (Pb,La)(Zr,Ti)O-3 Inverse Opals

Application of Three-Dimensional ZnO Inverse Photonic Crystal in Dye-Sensitized Solar Cells

Gold–Silica Inverse Opals by Colloidal Crystal Templating

Physical and Optical Properties of Inverse Opal CeO2 Photonic Crystals

PLZT Inverse Opal Materials Derived from Sol-Gel Process

UV Lasing in High-Order Bands of ZnO Inverse Opal Photonic Crystals

Preparation of colloidal crystal template for inverse opal hydrogels

Photoluminescence properties of Zn2SiO4:Mn 2+ inverse opals

Strong Suppression and Enhancement of Photoluminescence in Zn2sio4 : Mn2+ Inverse Opal Photonic Crystals

Preparation and Characterization of Pb0.56Sr0.44Zr0.52Ti0.48O3 Inverse Opal

Fabrication and Characterization of Monolithic 3D Amorphous Silicon Inverse-opal Photonic Materials with Magnesiothermic Reduction at a Lower Temperature

Fabrication of TiO_2 Doped Cerium Inverse Opal Structure by Sol-gel Method Using Colloid Crystal as Template

Inverse Opal Spheres Based on Polyionic Liquids As Functional Microspheres with Tunable Optical Properties and Molecular Recognition Capabilities