Numerical Investigation of YSZ Droplet Impact on a Heated Wall for Thermal Spray Application
Jaeuk Lee,Kshitiz Kumar Subedi,Gordon W. Huang,Jonghyun Lee,Song-Charng Kong
DOI: https://doi.org/10.1007/s11666-022-01437-6
IF: 2.839
2022-07-23
Journal of Thermal Spray Technology
Abstract:Coating technologies can improve mechanical components' durability and lifetime by rebuilding the damaged surfaces. Surface restoration by coating is much more cost-effective than replacing the damaged component. Thermal spray is an effective coating technology for surface restoration. The thermal spray process involves the heated coating materials (e.g., ceramics, metal alloys, and metallic) being propelled onto the substrate as molten or semi-molten droplets to form a dense coating. However, material mismatches and extreme impact conditions can affect the quality of the coating. A deposition splat is desirable for obtaining a well-coated substrate surface during the thermal spray process. In the present study, the Smoothed Particle Hydrodynamics (SPH) method is employed to investigate the outcome of droplet impacts on substrates at thermal spray conditions. Various physical phenomena are simulated, including droplet behavior, heat transfer, and solidification; these phenomena are challenging to track and visualize experimentally. This work investigates the threshold of deposition splat of yttria-stabilized zirconia (YSZ) droplet impact under different substrate conditions. Two different substrate materials are considered, including YSZ and stainless steel. Numerical results are validated by experimental data obtained from the literature. The results show that the impact velocity and substrate temperature collectively determine the formation of the deposition splat. The splash occurs when the YSZ droplet impact velocity exceeds 437 m/s at substrate temperature 423 K. As the substrate temperature increases, the threshold of forming a deposition splat decreases slightly, resulting in an irregular splat morphology. The heat transfer effect is more pronounced at lower substrate temperatures, causing the droplet to solidify quickly. A regime diagram is proposed to characterize the outcomes of thermal spray impact in terms of the Sommerfeld parameter ( K parameter) and substrate temperature. This study demonstrates the validity of the present SPH method for use in predicting and designing the thermal spray processes.
materials science, coatings & films