Abstract:This study focuses on understanding the crucial phenomenon of deposition stress during the splat formation of plasma-sprayed droplets, which is essential for comprehending coating stress in applications such as plasma spraying. A novel three-dimensional coupled fluid–solid and thermo-mechanical model was developed, which employed the volume of fluid method and finite element method. This model was applied to simulate the formation of deposition stress in molybdenum droplets during plasma spraying onto a stainless steel substrate with laser-textured groove patterns. It successfully replicated various stages of the splat formation process, including impacting, spreading, cooling, and solidification, which captured the evolution of temperature, strain, and stress in the splat and groove walls. The accuracy of the model was validated through X-ray diffraction measurements of splat deposition stress on the planar substrate surface . The simulation results revealed that deposition stress was induced during the simultaneous spreading and solidification of the droplet. This stress was attributed to quenching and solidification contraction, which resulted in tensile stress in the splat, with higher stress at the bonding interface edges. By contrast, the groove walls experienced compressive stress, which peaked in the central groove region. The mean isotropic stress and von Mises stress of the splat were quantified as 176 and 141 MPa, respectively. In-situ curvature tests demonstrated that stress relaxation, which was triggered by splat deposition stress, resulted in a 24.6% reduction in cracking, yielding, and slipping stresses. In addition, a refined theoretical equation for splat deposition stress was proposed, with correction coefficients of 0.119 determined from simulations and experiments. The developed simulation model offers reliable insights into the state of splat deposition stress, which provides valuable information for optimizing plasma-spray processes and enhances our understanding of coating stress in such applications.

Thermomechanical Simulation of Single Splat Solidification and Cooling in Plasma Spray Forming

Thermomechanical modeling of a single splat solidification in plasma spraying

Splat deposition stress formation mechanism of droplets impacting onto texture

Model of the thermal physics in plasma-sprayed coatings and calculation of residual stress

Numerical Simulation of Splat Formation Dynamics in Plasma Spray Forming

Analysis on Stress Filed of Plasma Spraying Particle During Solidification

Study of splat particle temperature distribution in plasma spray forming

Computational Fluid Dynamics Simulation of Splat Formation Process in Plasma Spraying

Three-dimensional Numerical Simulation of Splat Formation on Substrates in Plasma Spraying

Modeling of the residual stresses in plasma-spraying functionally graded ZrO2/NiCoCrAlY coatings using finite element method

Temperature Field Analysis of Plasma-Sprayed Coatings for Thin-Wall Parts

Simulation on Stress Accumulation during the Path-by-path Deposition Process of Thermal Barrier Coating by Plasma Spraying

Multi-Scale Thermo-Mechanical Model Simulation of Residual Stress in Atmospheric Plasma Spray Process

Analysis on Deposition Process and Residual Stress in Plasma Spraying

Numerical and experimental analysis of thermal and mechanical behavior of NiCrBSi coatings during the plasma spray process

Numerical Investigation of Substrate Melting and Deformation During Thermal Spray Coating by SPH Method

Studies of splat morphology and rapid solidification during thermal spraying

A calculation model for thermal performance during particle cooling in the substate-coatings system based on plasma spraying process

Three-dimensional Simulation of Plasma Sprayed Molybdenum Splat Formation on Different Substrates

Numerical Simulation of Zirconia Splat Formation and Cooling During Plasma Spray Deposition

Residual Stress Analysis of Cold-Sprayed Copper Coatings by Numerical Simulation