Abstract:To mitigate the sudden increase in the production of waste engineering slurry, predominantly composed of Kaolinite, this study investigated the flocculation and dewatering of Kaolin slurry treated with single- and dual-polymer flocculants. The influence of the flocculant type and dosage, under single- and dual-dose conditions, on slurry's sedimentation and the filtration characteristics, were thoroughly discussed. The results reveal that the adsorption bridging of the polymeric flocculant, resulting from hydrogen bonds, exerts a more significant effect than electrical neutralization on forming a large floc. Under single-dose conditions, nonionic polyacrylamides (NPAMs) with the strongest adsorption bridging leads to biggest flocs and the maximum settling rate of 21.55 mm/s. Under the dual-dose conditions of polymeric aluminium chloride (PAC) and PAM, the size of the slurry's floc decreases with an increase in PAC dosage. Nevertheless, the filtration performance of the slurry improves, with the lowest SRF value of the flocculated slurry being 1.58 × 1011 m/kg as 3‰ PAC and 3‰ NPAM is dosed. The improvement is explained by the micro-pore distribution of sludge. According to Mercury intrusion porosimetry (MIP) test, the slurry treated with the optimal dosage of dual-polymer flocculant exhibits the greatest sludge pore size and connected porosity (with a maximum value of 20.99%). Furthermore, the study discusses and compares the flocculation mechanism of single- and dual-polymer flocculants. The obtained results provide guidance for selecting appropriate flocculants for dewatering inorganic slurries, using different dewatering methods, such as gravitational thickening or filter pressing.

Simply Talking About the Problems of High Suspended Solids Wastewater Treatment

The Development of Cationic Polymeric Flocculants

Flocculation Dynamics Modelling in Water Treatment Review

Research Progress of the Influence of Extracellular Polymeric Substances on the Flocculation Properties of Activated Sludge

The Development and Application of Flocculants

Development On Characterization Methods Of Inorganic Polymer Flocculants

Advances in the Study of Synthetical Flocculants for Wastewater Treatment

Experimental analysis of oily wastewater treatment by electrolytic and chemical flocculation technology

RECENT DEVELOPMENT ON THE ORGANIC HIGH MOLECULAR WEIGHT FLOCCULANT FOR DEWATERING SLUDGE

Research Progress on the Enhanced Flocculation in Water Treatment

Influence of Different Suspended Solid Concentration on the Coagulation and Its Mechanism Studies

STUDY AND APPLICATION OF NATURAL POLYMER FLOCCULANT IN TREATING WASTEWATER

Synergistic Enhancement of Pollutant Removal from High-Salt Wastewater Using Coagulation-Flotation Combined Process

Study on Mixing Shearing Process in Coagu-flocculation Physical Model

The Evaluation and Analysis on the Flocculation Efficiency of Inorganic Flocculants

Preparation, Performances, and Mechanisms of Microbial Flocculants for Wastewater Treatment

Experimental Flocculation Treatment of Effluent from Paper-making Plant by Waste Paper

Study on the Treating Methods of High Concentration Organic Wastewater in Production of Xanthate

Research on Flocculation Effect on the Combined Process of Enhanced Flocculation and Biological Treatment

Cause analysis and treatment measures of oilfield wastewater flocs float

Flocculation and dewatering of the Kaolin slurry treated by single- and dual-polymer flocculants