Abstract:Implementing appropriate measures to recycle and convert the organic matter in sewage into valuable products can effectively contribute to resource recovery. The macromolecular products derived from the hydrothermal liquid phase of sewage sludge (HL-MMP) were utilized as raw materials for preparing coarse organic flocculant (Co-flocculant), which can be re-used to enhance organic matter removal from sewage via flocculent settling. Two distinct chemical modification methods, namely etherification and grafting copolymerization, were compared and analyzed in terms of their suitability for the preparation. Through coagulation experiments, it was found that the Co-flocculant obtained from both methods yield satisfactory turbidity and COD removal. However, to achieve a higher turbidity and COD removal, the required dosage of the Co-flocculant (M-GTA) obtained by etherification is significantly larger than that of the Co-flocculant (M-DMC) obtained by graft copolymerization. Meanwhile the HL-MMP and Co-flocculant were characterized using FTIR, XPS, SEM and Charge Density, Intrinsic Viscosity of the latter were measured. The results of FT-IR and XPS showed that HL-MMP possesses numerous functional groups, which can serve as active sites for both modifying reactions. The charge density of the Co-flocculant obtained through the two methods is similar, however, the intrinsic viscosity of M-GTA is lower than that of M-DMC, indicating that the graft copolymerization seems to form products with larger molecular weight. Additionally, the analysis of the reaction mechanism revealed that the HL-MMP exhibits self-polymerization and bound monomer, DMC, facilitates polymerization in the graft copolymerization. Conversely, in the etherification, polymerization mainly depend on the addition of etherized monomer, GTA. The difference of reaction mechanisms can explain the relative quantitative requirements of modifying monomers and different preparation conditions. Therefore, graft copolymerization is deemed more suitable for modifying HL-MMP to synthetic Co-flocculant and deserves further comprehensive and detailed investigation.

Development On Characterization Methods Of Inorganic Polymer Flocculants

The Development and Application of Flocculants

Effect of nitrate or sulfate on flocculation properties of cationic polymer flocculants

Polymer based flocculants: Review of water purification applications

Application of Fractal Dimension on the Flocculation of Polymeric Ferric Phosphoric Sulfate

Optimization and Characterization of Polysaccharide-Based Bioflocculant Produced by Paenibacillus Elgii B69 and Its Application in Wastewater Treatment

Preparation and characterization of polymer-coated Fe3O4 magnetic flocculant

Progress in Researches of Polysilicate-Containing Composite Inorganic Polymer flocculants

Research Progress of Magnetic Flocculation in Water Treatment

Preparation of Strong Cationic Chitosan-graft-Polyacrylamide Flocculants and Their Flocculating Properties

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Coagulation-Flocculation Technology in Water and Wastewater Treatment

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Study on the Performance of a Novel Inorganic Polymeric Flocculant

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Flocculation and dewatering of the Kaolin slurry treated by single- and dual-polymer flocculants

Screening on Complexation and Applicatiom of Compound Microbial Flocculant and Chemical Flocculant

Characterization of the Flocculation Process from the Evolution of Particle Size Distributions

Comparison of modification methods for the preparation of coarse organic flocculant with macromolecular products from the hydrothermal liquid phase of sludge

Evaluation of a Novel Chitosan-Based Flocculant with High Flocculation Performance, Low Toxicity and Good Floc Properties

Synthesis, characterization and application of a novel starch-based flocculant with high flocculation and dewatering properties