Abstract:In hot and humid tropical countries, the air-conditioning system has a high energy usage in commercial buildings. This study introduces a static balance duct design method for a temperature dependent variable air volume system. Ducts are looped together, which cause the air to self-balance and minimize the pressure loss across the duct network. The static balance duct network can easily identify the critical zone of highest pressure loss. This zone appears at the longest duct length from the air source and is always consistent for different load conditions. The air supplied to this critical zone is controlled by the zone temperature sensor, which directs feedback to the variable frequency drive fan of the air-handling unit. The rest of the variable air volume terminal units are zone temperature controlled. The duct looping design mitigates the problems in pressure variations and complements the temperature dependent control strategy. An open office case study is carried out to demonstrate the merit of the static balance duct design method. An actual installation was completed in a shopping mall. The recorded temperature readings verified that the static balance duct network and temperature dependent variable air volume air-conditioning system is operational and functional. Approximately 27% energy savings is achieved compared to the constant air volume system. Practical application: The static balance duct design method is a combination of equal friction duct design method and a loop duct network. This static balance duct network can identify the critical zone of highest pressure loss and this zone is always consistent. In this temperature-dependent variable air volume (TDVAV), the variable air volume (VAV) terminal unit at the critical zone is eliminated. The zone temperature sensor at the critical zone provides direct feedback to the variable frequency drive fan. All other terminal units are temperature dependent. The static balance TDVAV system enhances energy savings, improves the performance of VAV system and reduces the faults for VAV systems.

Application of Viscous Drag Reduction by Additives in Heating Ventilation and Air-conditioning System

Application of additive drag reduction to heating systems

Application of the magnetic fluid in viscosity drag reduction

Drag Reduction Via Turbulent Boundary Layer Flow Control

Turbulent Drag Reduction with Surfactant Additives — Basic Research and Application to an Air Conditioning System

Review of Research on Mechanism of Drag Reduction by Polymer Additives

Experimental study on drag-reducing flow with cetyltrimethyl ammonium chloride

Experimental and Numerical Investigation on the Cavity Regime and Drag Reduction of Ventilated Partial Cavity

Boundary layer analysis of ventilated partial cavity for friction drag reduction

The Technology of Magnetic Fluid Viscosity Drag Reduction

Review of Research on Drag Reduction

Analysis of the Drag Reduction Performance and Rheological Properties of Drag-Reducing Additives

Applications of Additively Manufactured Adjustable Vaned Diffusers in Centrifugal Compressor

Application of Ultrasonic Technique in HVAC&R Field

Study on drag-reducing and heat transfer performances in heating water systems with CTAC additives

Energy-saving technologies for building heating, ventilation, and air conditioning systems

Progress of Surfactant Turbulent Drag Reduction

Discussion on Mechanism of Drag Reduction of Natural Gas Drag Reduction Agent

A Review of Recent Advances in Superhydrophobic Surfaces and Their Applications in Drag Reduction and Heat Transfer

Static balance duct design method and temperature dependent variable air volume systems

Drag-reducing characteristics of cationic surfactant solution flow in copper pipe