Abstract:The onset of pitting on high purity and ultra high purity aluminum has been studied in the micrometer range by using a microelectrochemical cell in order to evaluate influences that induce localized corrosion. Microelectrochemical tests on polished samples of Al 99.999 and Al 99.9999 in 1 M NaCl showed that pitting at large areas occurred at several hundreds mV more negative than at small areas, suggesting that even very pure Al contains weak points. On rough surfaces weak points are more “activated” than on smooth surfaces. Locally measured pitting potentials of polished samples were shifted to more positive values than those measured on ground samples. Larger areas contain always small scratches, even on polished samples. Hence, the surface roughness showed a minor influence on the onset of pitting on larger areas. Microelectrochemical measurements performed on pure Al 99.99 with small amounts of copper showed that a copper content below 30 ppm is too small to have a beneficial or detrimental effect, whereas a copper content above 300 ppm probably leads to the formation of small inclusions or precipitations that acted as preferential corrosion initiation sites. A copper content around 100 ppm showed a beneficial effect on very small areas but not on larger ones. The onset of pitting on high purity and ultra high purity aluminum has been studied in the micrometer range by using a microelectrochemical cell in order to evaluate influences that induce localized corrosion. In 1 M NaCl we tested the influence of the surface roughness, of the size of the exposed area , and of small amounts of alloyed copper.

High Pitting Corrosion Resistance of Pure Aluminum with Nanoscale Twins

Aluminum Co-Deposition via DC Magnetron Sputtering for Enhanced Pitting Resistance of Copper–Nickel Alloys

Nanotwinned Microstructure Engineering of Electroplated Copper for Enhanced Anti-corrosion in Alkaline Medium

Nanoscale heterogeneities dictate corrosion pathways in a high-strength aluminum alloy

Microelectrochemical Studies of Pit Initiation on High Purity and Ultra High Purity Aluminum

Mechanical and Corrosion Resistance Enhancement of Closed-Cell Aluminum Foams through Nano-Electrodeposited Composite Coatings

Nature-Inspired Incorporation of Precipitants into High-Strength Bulk Aluminum Alloys Enables Life-Long Extraordinary Corrosion Resistance in Diverse Aqueous Environments

Electrodeposition and Corrosion Behavior of Nanocrystalline Aluminum from A Chloroaluminate Ionic Liquid

Anodizing of Pure Aluminum Alloy with Incorporated Ferric Oxide Nanoparticles to Enhance the Aluminum Corrosion Resistance

Time-varying electrochemically heterogeneous entities during the micro-galvanic corrosion associated with nanoscale precipitates in an Al-Cu-Li alloy

Electrochemical noise features of pure aluminum during pitting corrosion in neutral NaCl solution

Corrosion and pitting behavior of pure aluminum 1060 exposed to Nansha Islands tropical marine atmosphere

Excellent corrosion resistance and hardness in Al alloys by extended solid solubility and nanocrystalline structure

Effects of Cu-content and passivation treatment on the corrosion resistance of Al0.3CuxCoCrFeNi high-entropy alloys

Computational and Experimental Insights into the Role of Acidic Molecules on the Corrosion Behavior on 7A46 Aluminum Alloy

Studies on Pitting Corrosion of Al-Cu-Li Alloys Part III: Passivation Kinetics of AA2098-T851 Based on the Point Defect Model

Pitting Corrosion Behavior in Novel Mn–N Alloyed Lean Duplex Stainless Steel Containing Cu

Study on corrosion and wear resistance of Ni-Zn-Al hydrotalcite film on Aluminum alloy surface

Remarkable improvement of wettability of Cu-coated carbon nanotubes by molten aluminum

Corrosion behavior and strengthening mechanism of Ni-Cu alloy coating on Nd-Fe-B magnets

Effect of magnetron sputtered Al coating and anodization on the hot corrosion performance of Ti48Al2Nb2Cr alloy