Abstract:Polymer composites are gradually replacing traditional metal materials in the fields of aviation, aerospace, automotive and medicine due to their corrosion resistance, light weight and high strength. Moulding technology and organization morphology of polymer composite are key elements affecting the quality of products and their application, so a vacuum hot pressing process for graphenex/poly(ether ketone ketone) (PEKK) (x = 0%, 2%, 3%, 4%, 5%, 6%) composite powders is explored with particularly designed moulding parameters to achieve high conductive properties and good mechanical properties in graphene/PEKK composite sheet with thickness of 1.25 mm and diameter of 80 mm. The vacuum environment ensures that the graphene is not oxidized by air during hot pressing molding, which is essential for achieving conductive property in the graphene/PEKK composite; The hot pressing temperature of each graphene/PEKK composite powder is higher than glass transition temperature but lower than melting temperature, which ensures the graphene/PEKK composite powders is fully compacted and then graphene is fully lapped in the composite sheet. In addition, the graphene/PEKK composite sheet shows conductive property when the graphene content increases to 3wt%, and then the conductivity of the composites increases and then decreases with a peak value at 5wt% with increasing graphene content. By comparing the mechanical properties and microstructure morphology of the graphene/PEKK composite sheets, it was obtained that graphene content has an obvious effect on the mechanical properties of the composites, e.g., the mechanical properties will be increased as the graphene content increasing when graphene content is more than 3%. The graphene distribution law of the composite material with different graphene contents is analysed using a scanning electron microscope (SEM).

A Preliminary Study on Mechanical-Electrical Behavior of Graphite Powder-Filled High-Density Polyethylene Composites

STUDY ON PIEZORESISTIVITY OF HIGH DENSITY POLYETHYLENE/GRAPHITE SEMI-CONDUCTIVE COMPOSITES

Compressive Behavior of Engineered Cementitious Composites under High Strain-Rate Loading

Reversible Nonlinear Conduction Behavior for High‐density Polyethylene/graphite Powder Composites Near the Percolation Threshold

Thermal, Electrical and Rheological Behavior of High-Density Polyethylene/graphite Composites

Temperature-dependence of dynamic rheological properties for high-density polyethylene filled with graphite

Thermal conductivity of high density polyethylene filled with graphite

Correlation Between Percolation Behavior of Electricity and Viscoelasticity for Graphite Filled High Density Polyethylene

Rheological Properties and Percolation of High-Density Polyethylene Filled with Graphites Having Different Topological Parameters

The Electric Self-Heating Behavior of Graphite-Filled High-Density Polyethylene Composites

Nonlinear Elastic Behavior and Failure Mechanism of Polyhedral Graphite Particles Undergoing Uniaxial Compression

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

Effect of Uniaxial Pressures on the Resistance of High Density Polyethylene/Carbon Black Composites

Study on the Mechanical Performances of Carbon Fiber/epoxy Composite Material Subjected to Dynamical Compression and High Temperature Loads

Electrically Conductive Properties of Ultra-high Molecular Weight Polyethylene/Graphene Nanoplatelets Composites

DYNAMIC VISCOELASTIC BEHAVIOR OF GRAPHITE FILLED HIGH DENSITY POLYETHYLENE COMPOSITES AND MODIFICATION OF MOONEY EQUATION

Expanded Graphite–epoxy Composites with High Dielectric Constant

Time-dependent uniaxial piezoresistive behavior of high-density polyethylene/short carbon fiber conductive composites

Hdpe/Expanded Graphite Electrically Conducting Composite

Preparation and Characterization of High‐density Polyethylene/expanded Graphite Conducting Masterbatch

Mechanical performance of graphenex/poly(ether ketone ketone) composite sheets by hot pressing