Influence of Combustion Power on Characteristics of Thermoacoustic Instability in a Swirl Combustor

周昊,李国能,岑可法
DOI: https://doi.org/10.3321/j.issn:0258-8013.2008.32.002
2008-01-01
Abstract:The fluid flow inside swirl combustors is very complicated, which drives a rich variety of vortex systems. In order to study the impact of combustion power on the characteristics of thermoacoustic instability inside swirl combustors, an experimental setup was built. The swirl combustor works under the standard atmosphere, the inner diameter of the fuel jet is 2 mm, while the swirling secondary air was introduced tangentially into the combustion chamber, which has a diameter of 48 mm and a height of 600 mm. The oscillating pressure as well as the temperature of the CH4/air flames was measured under different combustion power Pc (2.8~7.1 kW), the corresponding swirl intensity is about 0.58. Experimental results showed that the thermoacoustic resonant frequency lies between 251 and 273 Hz, and that the sound pressure level Lp increases linearly with the combustion power (Lp=112.099+3.537 Pc). Joint time frequency analysis method was employed to investigate the fluctuating pressure waveforms, and it is found that the oscillating pressure signals inside the swirl combustor show a property between time-constant and time-variant, both the main resonant frequency and amplitude are time functions, but the range of resonant frequency is relatively small. Under the experimental case with combustion power of 6.2 kW, the short-time sound pressure level reaches 153 dB.
What problem does this paper attempt to address?