Abstract:A reactor is an important piece of equipment used for reactive power compensation in power system and has a significant impact on the safe operation of power system. Thermal behavior is one of the main causes of reactor failures. For an accurate analysis of the thermal behavior of reactors, electromagnetic–thermal–fluid multi-physics coupling modeling is chosen. However, there is a huge difference in size between the overall structure of the reactor and its insulating material, which makes it difficult to perform mesh generation, resulting in dense mesh and significantly increased solution degrees of freedom, thus making the solution of the reactor’s multi-physics field model very time-consuming. To address this, this paper proposes a simplified processing method to accelerate the solution calculation of the reactor’s multi-physics model. This method calculates the equivalent turns of each encapsulate with parallel coils in the reactor, simplifying the encapsulate into a single-layer coil, thereby greatly reducing the division and solution degrees of freedom of the multi-physics model, and thus accelerating the simulation calculation. Taking a BKDCKL-20000/35 dry-type air-core shunt reactor as an example, the outer diameter of the coil is nearly 12,000 times bigger than the coil insulation, which is a huge size difference. Both refined models and simplified models are established. Compared to the simulation results of the detailed model, the simplified model demonstrates good accuracy; the maximum relative error of temperature is just 2.19%. Meanwhile, the computational time of the simplified model is reduced by 35.7%, which shows promising effectiveness and significant potential for applying the optimization design and operation prediction of dry-type air-core shunt reactors for enhanced thermal performance.

Research on the Voltage-Sharing Characteristics of ±800 Kv Erect Dry-Type Smoothing Reactor

Research on the Electric Field Distribution and Voltage-Sharing Structure of ±800 Kv Oblique Dry-type Smoothing Reactors

Distribution of electric field and structure optimisation on the surface of a ±1100 kV smoothing reactor

Study on Electric Field Distribution and Switching Impulse Discharge Characteristics of ±1100kv Dry-Type Smoothing Reactor

Lightning Overvoltage Withstand of a ±800 Kv Smoothing Reactor

Antiseismic Characteristics of Composite Post Insulators for Smoothing Reactors on UHVDC

Simulation and Experiment on Discharge Characteristics of Indoor Devices in ±1100 Kv Converter Station Based on Potential Gradient Equivalent Method

Analysis on Insulation Coordination Scheme for ±800 Kv DC Converter Station

Research on the Influence of Current Limiter Based on Highly Coupled Split Reactor on Main Circuit Breaker Overvoltage

Influence of Smoothing Reacteor Arrangement on Transients of Converter Station for &#x00b1;500kv Double-Circuit HVDC System

Numerical Simulation of Mechanical Stress & Thermal Stress Test of 550kV High Coupled Split Reactor

Study on Discharge of Grading Rings for Insulators in the 500 Kv Gangcheng Substation

Static Fatigue Analysis and Research on UHV Shunt Reactor

Simulation and Experiment Research on Dynamic Stress of 21kv Equivalent Prototype of 500kv Current Limiter High Coupled Split Reactor

Mechanical & Thermal Stress Analysis under Actual Condition and Test Design of 550kv High Coupled Split Reactor

Application of Electrothermal Coupling Field Analysis to Electric Field Distribution Calculation of ±800 kV Wall Bushing

A Finite Element Method for the Calculation of the Voltage Distribution along the 500kV Line Insulators

Electric Field Computation and Corona Test for Composite Cross-Arms in 750kV Cup Type Tower

Three-phase Modeling of Vacuum Circuit Breakers Switching off Shunt Reactors

Thermal Simulation and Analysis of Dry-Type Air-Core Reactors Based on Multi-Physics Coupling

Simulation and Design of Electric Field Distribution for the Incoming Conductor Between 330 Kv Terminal Tower and 750 Kv Substation