Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Fe Salts As Catalyst for the Wet Oxidation of O-Chlorophenol

Catalytic Wet Air Oxidation of Ochlorophenol in Wastewater

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Removal of 4-Chlorophenol from Polluted Water by Aluminum-Iron Alloys.

Preparation of RuO2/γ-Al2O3 Catalysts and Study on Catalytic Wet Air Oxidation of Phenol

Microwave Oxidation Process for Treatment of Phenol in Water with Ferrate Catalyst

STUDY ON THE CATALYTIC OXIDATION OF WASTEWATER CONTAINING PHENOL WITH CHLORINE DIOXIDE AS OXIDANT

Catalytic wet oxidation of o-chlorophenol at mild temperatures under alkaline conditions

Phenol Degradation by UV-Enhanced Catalytic Wet Peroxide Oxidation Process

Effect of inorganic salt on the removal of typical pollutants in wastewater by RuO 2 /TiO 2 via catalytic wet air oxidation

Kinetics Study on Catalytic Wet Air Oxidation of Phenol by Several Metal Oxide Catalysts.

Catalytic wet air oxidation of phenol over RuO2/gamma-Al2O3 catalyst

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

Wet Air Oxidation of Desizing Wastewater from the Textile Industry

Efficient advanced treatment of coking wastewater using O3/H2O2/Fe-shavings process

Study of Catalysts’ Influence on Photocatalysis/Photodegradation of Olive Oil Mill Wastewater. Determination of the Optimum Working Conditions

Catalytic Wet Air Oxidation of Phenol with Ru/ZrO2-CeO2 Catalyst

Fenton Oxidation Kinetics of O-Chlorophenol Wastewater

Catalytic Wet Air Oxidation of Phenols over Porous Plate Cu-based Catalysts

Phenolic compounds removal by wet air oxidation based processes

Research on wet air oxidation of high-chloride chemical wastewaters and economic analysis