Abstract:The design and development of cost-effective and increased methanol permeable and proton-conductive membranes are critical concerns in the fabrication of polymeric electrolyte membranes (PEM). A solution-casting process was used to create a low-cost PEM based on sulfonated polyvinyl chloride (SPVC)-Polymethyl methacrylate (PMMA) blended with varying concentrations of Poly(sodium 4-styrenesulfonate) (PSS). The contact angle, oxidative stability, swelling ratio, water uptake, and methanol uptake of SPVC/PMMA/PSS membranes were investigated as a function of PSS molar ratio. FT-IR examination, 1 H NMR spectra, Raman spectroscopy, X-ray diffraction, thermogravimetric analysis (TGA), and scanning electron microscope micrographs were additionally utilized for confirming the chemical structure, morphology, and thermal stability of SPVC/PMMA/PSS membranes. Furthermore, the ion exchange capacity (IEC), proton conductivity, and methanol permeability of SPVC/PMMA/PSS membranes were investigated depending on the PSS concentration. The results showed a significant increase in proton conductivity from 1.80 × 10 –2 for SPVC/PMMA/1%PSS to 4.7 × 10 –2 S/cm for SPVC/PMMA/5%PSS at ambient temperature. On the other hand, the methanol permeability (P = 8.53 × 10 –8 cm 2 /s) was noticeably lower than that of Nafion 117 (3.39 × 10 –6 cm 2 /s). Additionally, the IEC of the manufactured membrane was 1.38 ± 0.7 meq g −1 for SPVC/PMMA/5%PSS compared to 0.91 meq g −1 for Nafion 117 membranes. The maximum water uptake of the synthesized membranes was 48.37 ± 2.27%, whereas Nafion 117 membrane absorption was 65.44%. According to conductivity studies and the membrane efficiency factor, the ideal PSS content in a polymer matrix is 4 wt.%. Finally, the developed SPVC/PMMA/PSS polyelectrolytic membranes show improvements in essential properties such as methanol permeability, proton conductivity, and IEC when combined with low-cost materials, making them an attractive contender as PEM for DMFCs.

A New Proton Conducting Membrane Based on Copolymer of Methyl Methacrylate and 2-Acrylamido-2-methyl-1-propanesulfonic Acid for Direct Methanol Fuel Cells

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

High Performance Cross-Linked Poly(2-acrylamido-2-methylpropanesulfonic acid)-Based Proton Exchange Membranes for Fuel Cells

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

New Proton Exchange Membranes Based on Poly (vinyl Alcohol) for Dmfcs

Investigation on sulfonated PVC/polymethyl methacrylate (PMMA)/polystyrene sulfonate (PSS) polymer blends as proton-conducting membrane

Amino-MIL-53(Al)-Nanosheets@Nafion Composite Membranes with Improved Proton/Methanol Selectivity for Passive Direct Methanol Fuel Cells

A nanocomposite proton exchange membrane based on PVDF, poly(2-acrylamido-2-methyl propylene sulfonic acid), and nano-Al2O3 for direct methanol fuel cells

A High-Methanol-Permeation Resistivity Polyamide-Based Proton Exchange Membrane Fabricated via a Hyperbranching Design

Zwitterion-functionalized nanofiber-based composite proton exchange membranes with superior ionic conductivity and chemical stability for direct methanol fuel cells

Crosslinked Hybrid Membranes Based On Sulfonated Poly(Ether Ether Ketone)/Gamma-Methacryloxypropyltrimethoxysilane/Phosphotungstic Acid By An In Situ Sol-Gel Process For Direct Methanol Fuel Cells

A Robust Composite Proton Exchange Membrane of Sulfonated Poly (Fluorenyl Ether Ketone) with an Electrospun Polyimide Mat for Direct Methanol Fuel Cells Application

PA-doped nanofiber composite proton exchange membranes with ultrahigh proton conductivity and methanol barrier performance for direct methanol fuel cells

Hybrid Proton Conducting Membranes Based on Sulfonated Cross-Linked Polysiloxane Network for Direct Methanol Fuel Cell

Proton exchange membranes based on sulfonated polybutylene fumarate: Preparation and characterization

Synthesis and Characterization of Novel Sulfonated Naphthalenic Polyimides As Proton Conductive Membrane for DMFC Applications

Modifying A Proton Conductive Membrane By Embedding A "Barrier"

Hydrocarbon proton-conductive membranes prepared by radiation-grafting of styrenesulfonate onto aromatic polyamide films

A novel proton-conductive membrane with reduced methanol permeability prepared from bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO)

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles