Abstract:Highlights: (1) A 3D simulation model of MWA (microwave ablation) based on the temperature-dependent characteristic parameters and blood flow parameters was established to realize the visual simulation of temperature distribution and coagulation zone. The internal forced convection condition was used to accurately characterize the large vessel. (2) The ex vivo MWA experimental platform was built to verify the accuracy of the simulation model. A peristaltic pump was employed for operatively controlling blood circulation and a medical soft plastic tube was introduced for appropriately simulating a blood vessel. (3) The influences of blood flow parameters of large vessels on temperature distribution and coagulation zone were systematically analyzed in order to provide reference and guidance for MWA clinicians. Purpose: Clinical MWA of liver tumor is significantly limited by the accurate prediction of vascular cooling effects. To provide reference and guidance for clinical MWA of liver tumor, the three-dimensional effects of different blood flow parameters of large vessels on MWA temperature distribution were systematically evaluated. Materials and methods: Firstly, the MWA three-dimensional finite element simulation model with blood flow parameters was established. Secondly, to verify the effectiveness of the model, MWA was performed ex vivo in porcine liver for 360 s and the temperature was measured by thermocouples. A medical soft plastic tube was placed parallel to the MWA antenna to simulate a natural liver vessel. Finally, based on this model, the influences of different vessel diameters and vessel-antenna spacings on MWA temperature distribution were analyzed. Results: Sixteen ablations were performed to verify the accuracy of the simulation model. The mean temperature errors between measured data and simulation results at six measurement points were 3.87 ℃. In the first 10 seconds of MWA, the vessel cooling effect on temperature distribution was negligible. When the vessel-antenna spacing was 5 mm and the vessel diameter varied from 3 mm to 6 mm, the temperature at the measured point near the vessel decreased by 2.11 ℃ at 360 s. When the vessel diameter was 6 mm and the vessel-antenna spacing varied from 5 mm to 7 mm, the temperature at the measured point near the vessel reduced by 14.91 ℃ at 360 s. In addition, blood diameter had little influence on the temperature distribution near the heating point. The volume of coagulation zone will not be obviously affected once the vessel lies outside the predicted coagulation zone. Conclusions: The MWA simulation model with blood flow parameters is established. Vessel-antenna spacing is the primary factor affecting the temperature distribution. A vessel with larger diameter can have a more significant effect on the temperature distribution. The large vessel will take away and block part of conduction heat, so the coagulation zone will not be formed on the lateral side of the vessel.

Analysis to A Critical State of Thermal Field in Microwave Ablation of Liver Cancer Influenced by Large Vessels

Influences of blood flow parameters on temperature distribution during liver tumor microwave ablation

Effect of high blood flow on heat distribution and ablation zone during microwave ablation‐numerical approach

The Impact of Large Blood Vessel Location on Thermal Dose Distribution During Focused Ultrasound Surgery for Hepatic Tumor Ablation

Finite Element Analysis on Lesion Size of Internal-cooled Radiofrequency Ablation

Investigation of the Heat Sink Effect During Microwave Ablation in Hepatic Tissue: Experimental and Numerical Analysis

Effects of Large Blood Vessel Locations During High Intensity Focused Ultrasound Therapy for Hepatic Tumors: a Finite Element Study

Analysis of the fast scanning method for tumor ablation with the effect of the large blood vessel by numerical simulation

C-2024 : Numerical simulation on nano-cryosurgery using a hybrid cryotherm probe

Numerical study of the influence of water evaporation on radiofrequency ablation

Real-time monitoring of bioelectrical impedance for minimizing tissue carbonization in microwave ablation of porcine liver

Optimal condition confirmation of treatment conditions through analysis of intratumoral apoptotic temperature range of microwave ablation for various microwave frequencies and antenna insertion depth

Investigation of a Spherical-Section Ultrasound Phased Array for Hepatic Ablation

3D modeling of vector/edge finite element method for multi-ablation technique for large tumor-computational approach

Assessing The Thermal Damage Induced By Radiofrequency Ablation for Localized Liver Cancer

An Analytical Solution for Temperature Distributions in Hepatic Radiofrequency Ablation Incorporating the Heat-Sink Effect of Large Vessels.

The effects of electrical and thermal boundary condition on the simulation of radiofrequency ablation of liver cancer for tumours located near to the liver boundary

Modeling and Simulation of Ablation Induced by Ultrasound Phased Arrays Applicator

Numerical study of the induction of intratumoral apoptosis under microwave ablation by changing slot length of microwave coaxial antenna

Application study of using ultrasonic integral backscatter to monitor microwave coagulation therapy

Numerical Study Of The Effects Of Large Blood Vessels On Three-Dimensional Tissue Temperature Profiles During Cryosurgery