Abstract:Commercial oxygen-free copper sheets were cold-rolled with reduction rates ranging from 20% to 87% and annealed at 400, 500 and 600 °C. The microstructure and texture evolution during the cold-rolling and annealing processes were studied using optical microscopy (OM), scanning electron microscopy (SEM) and electron back-scattered diffraction (EBSD). The results show that the deformation textures of {123}<634> (S), {112}<111> (Copper) and {110}<112> (Brass) were continuously enhanced with the increase in cold-rolling reduction. The orientations along the α-oriented fiber converged towards Brass, and the orientation density of β fiber obviously increased when the rolling reduction exceeded 60%. The recrystallization texture was significantly affected by the cold-rolling reduction. After 60% cold-rolling reduction, Copper and S texture components gradually decreased, and the {011}<511> recrystallization texture component formed with the increase in annealing temperature. After 87% cold-rolling reduction, a strong Cube texture formed, and other textures were inhibited with the increase in annealing temperature. The strong Brass and S deformation texture was conducive to the formation of a strong Cube annealing texture. The density of the annealing twin boundary decreased with the increase in annealing temperature, and more annealing twin boundaries formed in the oxygen-free copper sheets with the increase in cold-rolling reduction.

Investigation of Microstructure and Texture of High Purity Copper During Cold Rolling

Microstructure and Mechanical Properties of Pure Copper Subjected to Skin Pass Asymmetric Rolling

Microstructural Changes Produced by Fatigue in High-Purity Copper Severely Deformed by Cryogenic Rolling

Microstructure and Texture Evolution in Cold-Rolled and Annealed Oxygen-Free Copper Sheets

Investigation on Grain Size Effect of Rolling Texture in Copper

Texture Evolution in an Al-Cu-Mg Alloy During Hot Rolling

Relations of Rolling Reduction and Microstructure, Texture and Bending Property of Rolled Copper Foils

Evolution of the Brass Texture in an Al-Cu-Mg Alloy During Hot Rolling

Effect of cryogenic rolling on the microstructure and texture of CuCrZr alloy

Evolution of Goss Texture in an Al–Cu–Mg Alloy During Cold Rolling

Microstructure Evolution in Bulk Nanostructured Copper During Repeated Cold Rolling

Evolution of Microstructures and Textures of High Purity Aluminium During Rolling and Annealing

An Investigation on Rolling Texture Transition in Copper Preprocessed by Equal Channel Angular Pressing

Microstructure and Texture Evolution in the Cryorolled CuZr Alloy

Effects of Cold Rolling Path on Recrystallization Behavior and Mechanical Properties of Pure Copper During Annealing

Microstructure and textures in cold rolled aluminum strip

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Effects of microstructure and texture on the deep drawability of C10200 copper sheets

Effect of Cold Rolling on Microstructure and Hardness of Annealed Al–Cu–Mg Alloy

Effects of dislocation slip behaviour and second-phase particles on hot rolled texture of an Al-Cu-Mg alloy with a high Cu/Mg ratio

Size Effect on Mechanical Properties and Texture of Pure Copper Foil by Cold Rolling