Abstract:Electron beam probe (EBP) is a new principle detector, which makes use of a low-intensity and low-energy electron beam to measure the transverse profile, bunch shape, beam neutralization and beam wake field of an intense beam with small dimensions. While can be applied to many aspects, we limit our analysis to beam distribution reconstruction. This kind of detector is almost non-interceptive for all of the beam and does not disturb the machine environment. In this paper, we present the theoretical aspects behind this technique for beam distribution measurement and some simulation results of the detector involved. First, a method to obtain parallel electron beam is introduced and a simulation code is developed. And then, EBP as a profile monitor for dense beam is simulated using fast scan method under various target beam profile, such as KV distribution, waterbag distribution, parabolic distribution, Gaussian distribution and halo distribution. Profile reconstruction from the deflected electron beam trajectory is implemented and compared with the actual one, and an expected agreement is achieved. Furthermore, Instead of fast scan, a slow scan, i.e. step-by-step scan, is considered, which lows the requirement for hardware, i.e. Radio Frequency deflector. we calculate the three dimensional electric field of Gaussian distribution and simulate the electron motion under this field. In addition, fast scan along the target beam direction and slow scan across the beam is also presented, and can provide a measurement of longitudinal distribution as well as transverse profile simultaneously. Final, simulation results for China Accelerator Driven Sub-critical System (CADS) and High Intensity Heavy Ion Accelerator Facility (HIAF) are given to investigate the quantitative behavior of EBP.

Slanted Hole Array Beam Profiler (Sharp)- A High-Resolution Portable Beam Profiler Based on A Linear Aperture Array

Slanted Hole Array Beam Profiler (SHArP) - A High-Resolution Portable Beam Profiler Based on a Slanted Linear Aperture Array

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

Single-Shot White-Light Dispersive Interferometric Profilometer

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

In situ beam trajectory tilt measurement based on single cavity beam position monitor

A Hybrid Solid-State Beam Scanner for LiDAR Applications

Full Area Covered 3D Profile Measurement of Special-Shaped Optics Based on a New Prototype Non-Contact Profiler.

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

Two-dimensional Beam Scanner Based on Silicon Optical Phased Array with Half-Wavelength Period

High Resolution and High Precision Beam Profile Monitor for Particle Accelerator using linear contact image sensor

A High-Speed Full-Field Profilometry with Coded Laser Strips Projection

Automated pinhole-aperture diagnostic for the current profiling of TWT electron beams

A Hybrid Solid-State Beam Scanner for FMCW LiDAR Application.

Solid-State Slow-Light Beam Scanner With Ultra-Large Field of View and High Resolution

Generalized Hartmann-Shack array of dielectric metalens sub-arrays for polarimetric beam profiling

Dual profilometry based on Fourier single-pixel imaging using annular Fourier coefficient measurements

Wide-angle high-precision electronically controlled continuous beam scanning implementation based on MLAS cascaded AFOC

Non-integral depth measurement of high-aspect-ratio multi-layer microstructures using numerical-aperture shaped beams

Circularly Polarized Corporate-Feed Beam-Scanning Array with Low Profile

Beam distribution reconstruction simulation for electron beam probe