Abstract:Light-frame buildings commonly employ shear wall realized by framing and sheathing panels made of wood materials. Recently, much research has focused on the use of engineered bamboo composites to substitute wood in light-frame buildings. The aim of this study is to investigate the thermal insulation performances of bamboo- and wood-based shear walls in light-frame buildings. First, an archetype wall with characteristics similar to those commonly employed in wood shear walls was defined. Starting from the archetype wall, four specific configurations representing one classical full wood-based configuration, one hybrid bamboo-wood-based configuration and two full bamboo-based configurations with different studs thickness were identified to be tested. The thermal conductivity of the materials composing the wall was measured using a hot plate apparatus varying the temperature in the range of 10-50 degrees C. The anisotropy of the thermal conductivity was analyzed for the wood and bamboo materials. The four specific configurations of the archetype wall were tested in a guarded hot box apparatus in order to determine the thermal resistance and transmittance. The experimental results were compared with the estimates obtained using the ISO 6946 procedure and a Finite Element (FE) model of the wall, both adopting the thermal conductivity previously measured. A good agreement between the experiments and the models was found with the better results obtained with the FE model. Finally, the so-validated FE model was used to optimize the archetype wall with only bamboo-based materials to the Chinese thermal regions, showing the possibility of real application in the practice. All the results indicate that the thermal insulation performances of engineered bamboo composites are slightly lower compared with wood ones, both at the material and the shear wall levels. This indicates that there is the possibility of using bamboo-based shear walls in light-frame buildings ensuring thermal insulation performances similar to classical wood-based one. (C) 2018 Elsevier B.V. All rights reserved.

The Application of Short Shearing Wall in the Design of Frame-shear Wall Structure of Small High-rise Houses

A Practical Shear Wall Layout Optimization Framework For The Design Of High-Rise Buildings

Practical application of design and construction of steel shear walls

Shear Wall Layout Optimization Strategy for High-Rise Buildings Based on Conceptual Design and Data-Driven Tabu Search

Lightweight Woodframe Shear Walls with Ply-Bamboo Sheathings

Size Optimization Design of Members for Shear Wall High-Rise Buildings

Thermal Insulation Performance of Bamboo- and Wood-Based Shear Walls in Light-Frame Buildings

Shear Wall Layout Optimization of Multi-Tower Buildings Based on Conceptual Design and Extended Evolutionary Structural Optimization Method

Study on Short-pier Shear Wall

APPLICATION FOR REINFORCED SMALL-SIZED CONCRETE BLOCK SHEAR WALL IN TALL BUILDING DESIGN

Study on the Seismic Performance of Frame-shear Wall Structures with High-strength Reinforced the Shear Wall

Structure Design of High-rise Residence Project of Ji'nan Railway Bureau at Jingshi Road

Performance Study on Shear Behavior of Cold-Formed Steel Framing Shear Wall with Single Gypsum Wallboard

Efficient analysis of shear wall-frame structural systems

Study and Numerical Analysis on Seismic Performance of Concrete U-Shaped Shear Wall

RESEARCH PROGRESS OF SHEAR WALLS: TYPES AND DESIGN METHODS

Comparison of structural design and analysis of a 6-storey residential building in Harbin

Analysis and Optimization of Deformation Capacity on High-Level Short-Leg Shear Wall

Advantage Analysis of Reinforced Block Short-leg Masonry Shear Wall in Post-disaster Reconstruction

Experimental Study on the Seismic Behavior of a Frame-Supported Reinforced Masonry Short-Limb Shear Wall Structure

Elasto-Plastic Seismic Shear Distributions of Frame-Wall Structures