Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Springback prediction continues to play a special role in the process design of sheet metal forming processes. During the forming process, elastic energy is stored in the sheet metal, which is released after the tool is opened. The dimensional accuracy and the function of the component in particular can be negatively affected by this. For this reason, the springback is predicted by means of numerical modeling in order to improve the process design. The simulation accuracy depends primarily on the used material model to map the stress-dependent material behavior and the quality of the experimental input data. High-strength aluminum alloys, which have a distinctive springback behavior, have a slightly pronounced tensile-compressive asymmetry. Since tensile and compressive stresses often occur in sheet metal forming processes, the consideration of this effect can lead to an improvement in springback prediction. Besides modeling the yield locus curve for describing the yield strength in the plane stress area, the yield curve data is also relevant for determining the strain hardening behavior. The work hardening is usually characterized by the tensile test or the hydraulic bulge test, which is used to describe the material behavior in the tensile stress state. A promising experimental method for the analysis of the material in the uniaxial compressive stress state is the sheet metal upsetting test. In addition to a local characterization of sheet metal materials, this test also enables the investigation of the material behavior at significantly higher plastic strains than in the tensile test. Thus, in this contribution it is examined to what extent the sheet metal upsetting test is suitable for improving the springback prediction quality of material models in sheet metal forming processes.

Fast Prediction of Springback at Product Design Stage for Sheet Metal Forming

Springback Prediction in Sheet Metal Forming Process Based on the Hybrid SA

Adaptive multiple scale meshless simulation on springback analysis in sheet metal forming

Springback prediction and compensation method for anisotropy sheet in multi-point forming

Comparison of Material Models for Spring Back Prediction in an Automotive Panel Using Finite Element Method

Numerical springback prediction for high-strength aluminum alloys based on the sheet metal upsetting test

Springback Prediction Using the Split-Ring Test Based on A Combined Anisotropic Hardening Model

Improving the Accuracy of Stamping Analyses Including Springback Deformations

Springback prediction method for double-curved workpiece considering plate anisotropy in multi-point forming

Prediction of spring-back and side-wall curl in 2-D draw bending

Analytical prediction of springback based on residual differential strain during sheet metal bending

SPRINGBACK CALCULATION AND TOOL MODIFICATION IN SHEET METAL FORMING

A new springback calculation method for double-curved medium thick plates based on the curvature of discrete points

Spring Back Behavior of Large Multi-Feature Thin-Walled Part in Rigid-Flexible Sequential Loading Forming Process

Study of the Influence of Element Size and Number of Integration Points on Accuracy of Sheet Springback Prediction

Springback compensation for a vehicle’s steel body panel

Springback Control in Complex Sheet-Metal Forming Based on Advanced High-Strength Steel

A Constitutive Model for Spring-Back Prediction in Which the Change of Young's Modulus with Plastic Deformation is Considered

Bending die design of leaf spring based on iterative springback compensation

Analysis on the Effects of Numerical Simulation Precision on Springback Prediction

An efficient closed-form solution for springback prediction and compensation in elastic–plastic creep age forming