Abstract:We propose a facile and continuous direct nitridation method for synthesizing fine aluminum nitride (AlN) particles using a drop tube furnace. Aerosolized Al powder as the raw material was continuously supplied through the top of the furnace together with N2 as a carrier gas. Once in the furnace, the Al powder reacted with the N2 to form AlN. A particular advantage of this process is that it allows the continuous synthesis of fine AlN particles. In this study, either a mullite (Al2O3–SiO2) or an alumina tube was used to fabricate the furnace, and the products were collected in a crucible placed at the bottom. Upon heating the mullite tube from 1200 to 1400°C, AlN was formed once the temperature exceeded 1250°C, and its product content increased with temperature. When the flow rate of the N2 carrier gas was decreased from 4 to 2 L min−1, the amount of AlN formed increased due to the increased residence time in the reactor. The morphology of the particles obtained was radially aligned nanofibers with droplets on the tips of the fibers. Transmission electron microscopy revealed that the Si in the mullite tube reacted with Al to form eutectic Al–Si droplets on the Al surface, in which these droplets acted as a catalyst of vapor–liquid–solid AlN fiber growth. When the alumina tube was used (1800°C), nitridation of Al was enhanced and radially aligned AlN nanofibers with no droplets on the tips were collected, mainly in a filter at the exhaust port. These AlN nanofibers are thought to form via vapor–solid growth and are easily carried along with the N2 gas flow, resulting in their deposition on the filter. The products collected in the crucible contained coarse Al particles, which are formed via Al particle agglomeration and coarsening through melting.

Nickel and copper deposition on fine alumina particles by using the chemical vapor deposition-circulation fluidized bed reactor technique

Nickel and copper deposition on Al2O3 and SiC particulates by using the chemical vapour deposition–fluidized bed reactor technique

Fluidized Bed Chemical Vapor Deposition of Copper on Micronic Alumina Powders

Nickel Coating on Alumina Ceramic Surface by Chemical Vapour Deposition and Its Wettability with Copper

Nickel and Nickel-Based Nanoalloy Thin Films from Alcohol-Assisted Chemical Vapor Deposition

A Rotation Fluidization Coupled Atomic Layer Deposition Reactor for Nanoparticle Coating

Investigation on nickel/alumina-nanoparticles co-deposition

Influence of Nano-Al2O3 Particles on Nickel Electrocrystallization at Initial Stage

A new route to apply nanometric alumina coating on powders by fluidized bed chemical vapor deposition

Fluidized Bed Coupled Rotary Reactor for Nanoparticles Coating Via Atomic Layer Deposition

Fluidized-bed atomic layer deposition reactor for the synthesis of core-shell nanoparticles

Fabrication of Nickel and Nickel Carbide Thin Films by Pulsed Chemical Vapor Deposition

Preparation of nanocrystalline SnO2 thin film coated Al2O3 ultrafine particles by fluidized chemical vapor deposition

Production and Characterization of Nanocrystalline SnO2 Films on Al2O3 Agglomerates by CVD in a Fluidized Bed

Facile catalyst deposition using mists for fluidized-bed production of sub-millimeter-long carbon nanotubes

On the Electrodeposition of Nickel–zinc Alloys from a Eutectic-Based Ionic Liquid

Atomic Layer Deposition of Nickel Carbide from a Nickel Amidinate Precursor and Hydrogen Plasma

Simulation of the Process of the Coating SnO 2 Film on Ultrafine Al 2 O 3 Particles by CVD in a Fluidized Bed

A Facile Method for Nickel Catalyst Immobilization on Ultra Fine Al2o3 Powders

Synthesis of AlN particles via direct nitridation in a drop tube furnace

Nickel Supported on Mesoporous Zirconium Oxide by Atomic Layer Deposition: Initial Fixed-Bed Reactor Study