Abstract:Featured by high power density and efficiency, high temperature superconducting (HTS) electric machines provide a promising solution to heavy-duty electric transport, e.g., electric aircraft. However, designing HTS machines, particularly high-speed HTS motors, presents significant challenges: 1) modelling is highly time-consuming due to the non-linear resistivity of superconductors and complex machine topology; 2) accurately estimating the AC loss of HTS windings remains an open aspiration due to the complicated AC environment. To reduce computational complexity, the thin film approximation (only considering the approximated 1-D HTS film) for HTS coated conductors (CCs) has been widely adopted in simulations, such as the T-formulation models; however, the thin film approximation becomes inadequate for HTS CCs under high-frequency magnetic fields, as encountered in high-speed motors for aerospace. To efficiently and accurately model the AC loss of HTS windings in high-speed superconducting machines, taking a 1 MW superconducting synchronous motor with HTS armature windings as an example, this paper has adopted a Time-Space Extrusion (TSE) method, which demonstrates a >25-fold decrease in modeling time while maintaining comparable accuracy to two benchmark H-A models. The power dissipation in both normal-conducting and superconducting layers of HTS windings has been studied, the AC losses in different turns of the armature winding have been explored, and the slot leakage field harmonics have been illustrated. Results have shown that the losses in Cu and Ag layers for high-speed HTS machines operating at cryo-temperatures (e.g., liquid hydrogen temperature) are not neglectable, especially with a high residual resistance ratio (RRR) and in the presence of harmonics. The HTS armature winding should be positioned away from the iron tooth and slot opening to minimise exposure to slot leakage fields. The adopted TSE modelling strategy and drawn conclusions have provided valuable insights for the efficient design of high-speed superconducting machines.

High T_c Superconductor Theoretical Models and Electromagnetic Flux Characteristics

Modeling of High- Tc Superconducting Bulk using Different Jc- T Relationships over Dynamic Permanent Magnet Guideway

Numerical Simulation of the Levitation Force of High-Tc Superconductors

Experimental Study of HTS Electromagnet and General Electromagnet

Levitation forces of an uncentralized high temperature superconductor thrust bearings

Static Behavior of a Complex High Temperature Superconductor Thrust Bearings

Electromagnetic and Thermomagnetic Properties of High- Superconductor in Its Mixed State: the Single-Vortex-motion Model

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

A frequency-domain finite element model for simulating high-temperature superconductors using the J-A and T-A formulations

The T-A formulation: an efficient approach to model the macroscopic electromagnetic behaviour of HTS coated conductor applications

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

AC Analysis of a High Temperature Superconductor Coil with Short Circuits

Numerical calculations of high temperature superconductors with the J-A formulation

Electromagnetic-thermal modeling of high-temperature superconducting coils with homogenized method and different formulations: a benchmark

Investigation of high-speed superconducting electric machines through time-space extrusion numerical modelling

NEW UNDERSTANDING OF THE ELECTRONIC PHASE DIAGRAM OF HIGH TEMPERATURE SUPERCONDUCTORS

A Phenomenological Study Of Angle-Resolved Photoemission Spectra For High-Tc Superconductors

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Path of Magnetic Flux Lines Through High-Tc Copper Oxide Superconductors

Circuit Model for HTS Flux Pump With Flux Conservation, Dynamic Resistance, and Flux Flow

Running magnetic resistance of high-Tc superconducting maglev prototype vehicle in an evacuated tube track