Abstract:This study conducted in situ combustion oxidation experiments on crude oil from Block D within the Liaohe Oilfield, utilizing a kettle furnace low-pressure oxidation reaction method at various temperatures. The molecular composition of oxidation products was analyzed using gas chromatography–mass spectrometry (GC–MS) and high-resolution mass spectrometry. The results reveal that the molecular composition of the products remains relatively stable up to 300 °C, exhibiting a slight increase in C13-C30 alkanes. The ratio of the peak area for C21 to bisnorhopane is 0.082. From 300 °C to 450 °C, compounds with long alkyl chains gradually undergo thermal cracking, resulting in a significant increase in the production of alkanes within the C10–C30 range. The concentration of saturated hydrocarbons produced through thermal cracking reaches its maximum at a temperature of 400 °C. The most abundant peak of n-alkane is observed at C21, with a quantified ratio of peak area for C21 to bisnorhopane at 6.5, indicating a two-order magnitude increase compared to crude oil. From 500 °C to 600 °C, compounds undergo more profound thermal cracking and condensation processes. The predominant hydrocarbons consist of aromatic molecules containing two to six rings substituted with short side chains. The double bond equivalent (DBE) values of carbazoles and carboxylic acids are determined as 30 and 25, respectively. At 600 °C, the peak area ratio of naphthalene to biodecane is 300, indicating a remarkable increase of five orders of magnitude compared to the crude oil. The present study elucidates the correlation between the characteristics of combustion components in crude oil and the corresponding combustion temperature. Primary cracking reactions within crude oil are promoted effectively when keeping the combustion zone at 350 °C and 450 °C. This process significantly reduces the viscosity of heavy oil and enhances its fluidity.

The Mechanism of Thermal Oxidation of a Hydrotreated Naphthenic Lube Base Oil at High Temperature

STUDY ON OXIDATIVE MECHANISM OF HYDRO-TREATED NAPHTHENIC RUBBER OIL UNDER ULTRAVIOLET RADIATION

Low Temperature Oxidation of Toluene in an N-Heptane/toluene Mixture

Isothermal low-temperature oxidation behavior and kinetics of heavy oil

Oxidation degradation analysis of antioxidant added to CTL base oils: experiments and simulations

The Deterioration Mechanism of Diester Aero Lubricating Oil at High Temperature

Temperature-Induced Deactivation Mechanism of Znfe2o4 for Oxidative Dehydrogenation of 1-Butene

Molecular composition of low-temperature oxidation products of the heavy oil

Experimental Study on Thermal Oxidation Dynamics of Lubricating Base-oil PAO

Study on the relationship between high temperature oxidation and temperature rise rate of engine oil

Effect of Temperature on the Chemical Composition and Physicochemical Properties of Diester Aviation Lubrication Oil

In Situ Combustion Characteristics of Heavy Oil in the Liaohe Oilfield at Different Temperatures

Thermal decomposition kinetics and anti-oxidation performance of commercial antioxidants

Testing the Validity of a Mechanism Describing the Oxidation of Binary N-Heptane/toluene Mixtures at Engine Operating Conditions

Evolution of the Pseudo-Components of Heavy Oil during Low Temperature Oxidation Processes

Exploration on the Synergistic Effect of Antioxidants for Coal-to-liquid Base Oil: from the Perspective of Oxidation Resistance and Thermal Stability

Ketones in Low-Temperature Oxidation Products of Crude Oil

Discoloration of Hydrotreated Naphthenic Rubber Base Oil at High Temperature

Compositional Changes in Hydrotreated Naphthenic Oil under Ultraviolet Radiation

STUDY ON THERMAL OXIDATION STABILITY OF PAO BASE-OIL

Spectroscopic Studies on Thermal-Oxidation Stability of Hydrocarbon Fuels