Abstract:To study the effect of different surface structures on resultant mechanical and rheological properties, nano-CaCO3 particles were treated with isopropyl tri-stearyl titanate (H928), isopropyl tri-(dodecylbenz-enesulfonyl) titanate (JN198), and isopropyl tri-(dioctylpyrophosphato) titanate (JN114). Scanning electron microscopy (SEM) and dynamic mechanic analysis (DMA), carried out to characterize the effective interfacial interaction between the nano-CaCO3 particles and a poly(vinyl chloride) (PVC) matrix, indicated that JN114 treated nano-CaCO3 particles had the strongest interfacial interaction with a PVC matrix, while H928 treated nano-CaCO3 had the weakest. The rheological and mechanical properties of PVC/nano-CaCO3 composites were investigated as a function of surface structure and filler volume fraction. The tensile yield stress and elongation at break decreased with the increasing of calcium carbonate content while tensile modulus increased. PVC filled with JN114 treated nano-CaCO3 had the highest tensile modulus and tensile yield stress, while those filled with H928 treated nano-CaCO3 had the highest elongation at break at the same filler content. The impact strength of PVC/nano-CaCO3 composites increased with the increasing of CaCO3 content, and PVC composites filled with JN198 treated nano-CaCO3 particle had a higher impact strength than those with JN114 or H928 treated, with the value reaching 23.9 +/- 0.7 kJ/m2 at 11 vol% CaCO3, four times as high as that of pure PVC. Rheological properties indicated that a suitable interfacial interaction and a good dispersion of inorganic filler in a PVC matrix could reduce the viscosity of PVC/nano-CaCO3 composites. The interfacial interaction was quantitatively characterized by semiempirical parameters calculated from the tensile strength of PVC/nano-CaCO3 composites to confirm the results from the SEM and DMA experiments.

The Influence of Particle Shape and Size of Inorganic Fillers on the Conductive Property of PVC/CPE/CB Composites

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Electrical Property and Microstructure Analysis of Poly(vinylidene Fluoride)-Based Composites with Different Conducting Fillers

Research on Electrical Properties of Carbon Filled Conductive Composites

Effect of Surface Structure of Nano-Caco3 Particles on Mechanical and Rheological Properties of Pvc Composites

Effect of Electrically Inert Particulate Filler on Electrical Resistivity of Polymer/Multi-Walled Carbon Nanotube Composites

Interfacial Structure and Mechanical Properties of Nano-CaCO3/PVC Composites Affected by CPE

Electrical and rheological properties of carbon black and carbon fiber filled low-density polyethylene/ethylene vinyl acetate composites

Microstructure and Interfacial Properties of CaCO3 Particle Reinforced Polyvinyl Chloride Composites

Effect of Properties of CaCO3 Nanoparticles on Interface and Properties of Poly(vinyl Chloride) Composites

Dielectric properties of the polymer based composites filled by the different conductivities fillers

Interfacial Structures and Mechanical Properties of Pvc Composites Reinforced by Caco3 with Different Particle Sizes and Surface Treatments

Study on char reinforcing of different inorganic fillers for polyethylene composites

The Effect of CaCu3Ti3.95Zr0.05O12 Fillers on Microstructure and Dielectric Behaviour of CaCu3Ti3.95Zr0.05O12/Polyimide Composites

Improving Dielectric Properties and Thermal Conductivity of Polymer Composites Withcacu3ti4o12and Β-Sichybrid Fillers

Influence of CaCO_3 on Electrical Properties of Carbon Black / Epoxy Composites

Study on the Mechanical Properties and Structue of PVC/BaSO_4 Nano-Composites

Effect of Filler's Parameters on Dielectric Performance of the Co-Filled Sphere-Fiber/polymer Composites by Numerical Evaluation

Structure and performance of high conductibility of silvered glass bead/silicone rubber composites

EFFECT OF THE NANOFILLER SHAPE ON THE CONDUCTIVE NETWORK FORMATION OF POLYMER NANOCOMPOSITES VIA A COARSE-GRAINED SIMULATION

Influence of Different Types of Conductive Filler on Electrical Properties of Powder Coatings