Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

Simulation Studies Underlying the Influence of Filler Orientation on the Electrical Properties of Short Carbon Fiber Conductive Polymer Composites: Implications for Electrical Conductivity Regulation of Micro/Nanocomposites

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

Effect of Filler Orientation on the Electrical Conductivity of Carbon Fiber/PMMA Composites

Analytical modeling of the electrical conductivity of CNT-filled polymer nanocomposites

Dielectric Properties and Conductivity of Carbon Nanofiber/semi-Crystalline Polymer Composites

Optimizing Mechanical and Electrical Performance of SWCNTs/Fe3O4 Epoxy Nanocomposites: The Role of Filler Concentration and Alignment

Influence of filler topology on the thermal transport of composite materials based on similarity principle modeling: A cross-scale simulation study

Electrical conductivity of anisotropic PMMA composite filaments with aligned carbon fibers - predicting the influence of measurement direction

Tuning the through-thickness orientation of 1D nanocarbons to enhance the electrical conductivity and ILSS of hierarchical CFRP composites

Insight into the interface effect and PTC effect on the temperature-adaptive electrical conductivity of epoxy composite

Orientation of discontinuous fillers in polymer Composites: Modelling, Characterization, control and applications

Effect of Fiber Alignment on Dielectric Response in the 1–3 Connectivity Fiber/polymer Composites by Quantitative Evaluation

Tuning dielectric/mechanical performance of polymeric composites for flexible electronics based on electric field-driven configurational entropy change: High throughput simulation and application

Effect of Filler's Parameters on Dielectric Performance of the Co-Filled Sphere-Fiber/polymer Composites by Numerical Evaluation

Dielectric properties of the polymer based composites filled by the different conductivities fillers

Effect of three-dimensional to one-dimensional orientation of cellulose nanofiber sizing agents on carbon fibers under magnetic and electric fields on composite material properties

Modeling of the Electrotransport Process in PP-Based and PLA-Based Composite Fibers Filled with Carbon Nanofibers

Single effect of filler spatial distribution states on the thermal conductivity of epoxy composites and their heat conduction mechanisms

Dielectric, mechanical and electro-stimulus response properties studies of polyurethane dielectric elastomer modified by carbon nanotube-graphene nanosheet hybrid fillers

Interfacial and Filler Size Effects on Mechanical/Thermal/Electrical Properties of CNTs-Reinforced Nanocomposites