Microtexture evolution in Mg-Y and AZ31 Mg alloy during hot deformation

YANG Xu-yue,ZHANG Lei,JIANG Yu-pei,ZHU Ya-kun
DOI: https://doi.org/10.19476/j.ysxb.1004.0609.2011.02.004
2011-01-01
The Chinese Journal of Nonferrous Metals
Abstract:The effects of Y on the dynamic recrystallization(DRX) and microtexture evolution of hot deformed Mg alloy were studied by optical,SEM and EBSD microscopy.For this purpose,AZ31 and Mg-Y alloy bars were compressed at strain rate of 3×10-3 s-1 and at temperature of 723 K.The results show that DRX frequently takes place in AZ31 Mg alloy just after being compressed to strained ε=0.2 and the volume fraction of DRX grains is more than 80% after further being compressed to strained 0.5.Whereas alloying by Y retarded DRX,the fraction of DRX in Mg-Y alloy is less than 10% even at the strain of 0.4.In AZ31 Mg alloy,the alignment of the basal planes initially parallel to the compression direction is rotated gradually by compression and approaches perpendicular to the compression direction in high strain and the basal texture is rotated by about 90o at the strain of 1.2.But in Mg-Y alloy,only a few grains rotate to be perpendicular to the compression direction with increasing strain.The basal texture caused by the rotated grains is significantly weakened and the orientation distribution becomes more random after DRX.The basal texture of Mg alloy can be significantly weakened after DRX by the addition of Y.
What problem does this paper attempt to address?