Abstract:During thermomechanical processing of wrought magnesium alloys, the microstructure and texture continue to evolve as dynamic recrystallization (DRX) proceeds. New grains generated by DRX with a low dislocation density also participate in the texture evolution as the strain increases. However, the controlling mechanisms that drive the evolution are not yet understood. In this work, we studied texture evolution in an extruded Mg–Al–Mn alloy (AM30) during uniaxial compression at 450°C and under various strain rates (ε̇<1.0s-1). The tests were performed along the extrusion direction (ED) and the radial direction (RaD), respectively. Texture evolution was examined by electron backscatter diffraction and X-ray diffraction at different strains. At ε̇<0.1s-1, the effect of twinning was negligible. At ε̇=0.5s-1, a high volume fraction of twins were activated but the twins were consumed by DRX as the strain increased. At ε̇=0.8s-1, twins were not completely consumed by DRX, and the remaining twins had highly incoherent twin boundaries and contributed to the texture. In compression along the ED and with strain rates of ⩽0.5s−1, prismatic slip dominated the texture evolution, and the final orientations clustered around 〈101‾0〉‖ED and〈21‾1‾0〉 || ED, resulting in two stable orientations with a 30° misorientation. At 0.8s−1, basal and pyramidal slip began to dominate the texture evolution at larger strain. In compression along the RaD, basal and pyramidal slip dominated the texture evolution, creating a texture located near 〈101‾2〉–〈101‾5〉–〈21‾1‾9〉–〈21‾1‾5〉and〈101‾0〉–〈21‾1‾0〉 in the inverse pole figure. Texture simulations based on the Sachs and the viscoplastic self-consistent models show a satisfactory correlation between texture evolution and deformation modes.

Effects of Dynamic Recrystallization Mechanisms on Texture Evolution in Mg-Gd-Y-Zr-Ag Alloy During Hot Compression

Microstructure and texture of coarse-grained Mg-Gd-Y-Nd-Zr alloy after hot compression

Dynamic Recrystallization Mechanisms During Hot Compression of Mg–Gd–Y–Nd–Zr Alloy

Effect of initial microstructure on the dynamic recrystallization behavior of Mg-Gd-Y-Zr alloy

Dynamic Recrystallization of Mg-8Gd-3Y-0.6Zr Alloy During Hot-Compression

The synergistic and interactive effects of slip systems and dynamic recrystallization on the weakening basal texture of Mg-Y-Nd-Zr-Gd magnesium alloy

Dynamic Precipitation and Recrystallization Mechanism During Hot Compression of Mg-Gd-Y-Zr Alloy

Effect of strain rate on dynamic recrystallization mechanism of Mg-Gd-Y-Sm-Zr alloy during hot compression

Dynamic Recrystallization Mechanism and Precipitation Behavior of Mg-6Gd-3Y-3Sm-0.5Zr Alloy During Hot Compression

Dynamic Recrystallization and Texture Evolution of Mg–Y–Zn Alloy During Hot Extrusion Process

Hot compression behavior and microstructure evolution of Mg-Gd-Y-Zn-Zr alloy

Texture Weakening and Grain Refinement Behavior of the Extruded Mg-6.03Zn-0.55Zr Alloy During Hot Plane Strain Compression

Dynamic Recrystallization Behaviors of a Mg-4Y-2Nd-0.2Zn-0.5Zr Alloy and the Resultant Mechanical Properties after Hot Compression

Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions

Dynamic Recrystallization Behavior of Mg-Gd-Y-Zr Alloy During Hot Compression

Texture Evolution During Dynamic Recrystallization in a Magnesium Alloy at 450 °C

Hot Deformation and Dynamic Recrystallization Behaviors of Mg–Gd–Y–Zr Alloy

Dynamic Recrystallization, Texture Evolution, and Improved Mechanical Properties of Mg-Y-Zn-V Alloy during Forging and Subsequent Extruding Deformation

Effects of Trace Ag on the Dynamic Recrystallization and Mechanical Properties of Mg-Gd-Y-Zr Alloy

Microstructure and texture evolution during high-strain-rate superplastic deformation of coarse-grained Mg-Gd-Y-Zr rolled sheet

Microtexture evolution in Mg-Y and AZ31 Mg alloy during hot deformation