Abstract:Electrically conductive polymeric materials have recently garnered significant interest from researchers due to their potential applications in the biomedical field, including medical implants, tissue engineering, flexible electronic devices, and biosensors. Poly (3,4-ethylenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS) is considered the most successful conducting polymer due to its higher electrical conductivity and chemical stability, but it suffers from limited solubility in common organic solvents, poor mechanical properties, and low biocompatibility. An area of tremendous interest is in combining PEDOT:PSS with another polymer to form a blend or composite material in order to access the beneficial properties of both materials. However, the hydrophilic nature of PEDOT:PSS makes it difficult to produce composites with non-polar polymers. In order to overcome these problems, we have specifically designed and synthesized two new sulfonated polyurethanes (PUS) with high sulfonic acid functionality. The two polyurethanes, one water-soluble (PUS1) and one water-insoluble (PUS2), were used to make blends with two commercially available PEDOT:PSS formulations (CleviosTM FET and PH1000). Solvent cast films on glass substrates were made from water-soluble PEDOT:PSS/PUS1 blends while free-standing films of PEDOT:PSS/PUS2 blends were fabricated by compression-moulding. Ethylene glycol was used as conductivity enhancer, which showed an increase in the conductivity by several orders of magnitude in most of the compositions investigated. The highest conductivity of 438 S cm−1 was achieved for the blend with 80 wt% of PEDOT:PSS (PH1000) in PUS1.

Preparation of poly(3, 4-ethylenedioxythiophene)/poly(styrene sulfonate) (PEDT/PSS) composite and its applications in anti-static coating

Preparation of SiO2-PEDT composite antistatic film by sol-gel method

Preparation and characterization of conducting poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Langmuir–Blodgett film

Electrically conductive textile coating with a PEDOT-PSS dispersion and a polyurethane binder

Fabrication of Poly(3,4‐ethylenedioxythiophene)‐polysaccharide Composites

Influence of water contents on structure and properties of SiO 2-PEDT composite antistatic thin film by sol-gel process

Preparation of TiO2-PEDT/PSS dual-layer composite film and its photocatalytic performance

Modified PEDOT-PSS Conducting Polymer as S/D Electrodes for Device Performance Enhancement of P3HT TFTs

Conductivity Enhancement of PEDOT:PSS via Addition of Chloroplatinic Acid and Its Mechanism

Conducting PEDOT–PSS Composite Films Assembled by LB Technique

Modification of PEDOT:PSS thin film properties using pyridine-based solid additive for optoelectronic applications

Enhancing the Electrical Conductivity and Long-Term Stability of PEDOT:PSS Electrodes through Sequential Treatment with Nitric Acid and Cesium Chloride

Preparation of Aqueous Poly(3,4-Ethylenedioxythiophene Methanol)-Poly(styrene Sulfonate) Dispersion and Its Capacitance Performance As Symmetric Supercapacitors

Nanotube and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composite film for the electrode applications in organic thin-film transistor and dye-sensitized solar cells

Solvent Treatment Inducing Ultralong Cycle Stability Poly(3,4‐ethylenedioxythiophene):Poly(styrenesulfonic Acid) Fibers As Binding‐free Electrodes for Supercapacitors

Flexible, Highly Transparent, and Conductive Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar Morphology

In-situ doping and post-treatments modulate the photoelectrical properties and stability of electropolymerization poly(3,4-ethylenedioxythiophene)

Improved Functionality of PEDOT:PSS Thin Films Via Graphene Doping, Fabricated by Ultrasonic Substrate Vibration-Assisted Spray Coating

Enhanced Microstructural Uniformity in Sulfuric Acid‐Treated Poly(3,4‐Ethylenedioxythiophene):Poly(Styrene Sulfonate) Films Using Raman Map Analysis

Poly(3,4-ethylenedioxythiophene)/poly(bis(4-phenoxysulfonic acid)phosphazene) conductive composites: an alternative interfacial layer to PEDOT : PSS

Electrical Conductivity, Thermo-Mechanical Properties, and Cytotoxicity of Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulfonate) (PEDOT:PSS)/Sulfonated Polyurethane Blends