Electrically conductive textile coating with a PEDOT-PSS dispersion and a polyurethane binder

Maria Åkerfeldt,Martin Strååt,Pernilla Walkenström

DOI: https://doi.org/10.1177/0040517512444330

IF: 2.3

2012-11-27

Textile Research Journal

Abstract:Electrically conductive textile coatings have been prepared by the addition of a dispersion of poly(3,4-ethylenedioxythiophene)-polystyrene sulfonate (PEDOT-PSS) and ethylene glycol to a polyurethane-based coating formulation. The formulations were designed to have similar viscosities, measured with a rheometer using a cone-and-plate set-up. The formulations were applied to woven poly(ethylene) terephthalate substrates using a direct coating method. The concentration PEDOT-PSS in the finished coatings varied between 0.7 and 6.2 wt%, the coating deposit between 19 and 155 g/m 2 and the drying procedure between 4 hours at 20°C and 10 minutes at 150°C. Surface resistivity was measured with a ring probe and surface topology was addressed with scanning electron microscopy (SEM). The PEDOT-PSS concentration had a large effect on the resistivity, which dropped by five orders of magnitude with an increased concentration. The steepest decrease occurred between 1 and 3 wt% PEDOT-PSS, indicating a percolation threshold. An increased coating deposit resulted in a resistivity drop by a factor 10, but no significant effect on the resistivity of the samples could be ascertained by variation of the drying conditions when samples had been subjected to subsequent annealing.

materials science, textiles