Abstract:With a theoretical capacity of 1166 mA·h·g(-1), lithium sulfide (Li(2)S) has received much attention as a promising cathode material for high specific energy lithium/sulfur cells. However, the insulating nature of Li(2)S prevents the achievement of high utilization (or high capacity) and good rate capability. Various efforts have been made to ameliorate this problem by improving the contact between Li(2)S and electronic conductors. In the literature, however, a relatively high capacity was only obtained with the Li(2)S content below 50 wt %; therefore, the estimated cell specific energy values are often below 350 W·h·kg(-1), which is insufficient to meet the ever-increasing requirements of newly emerging technologies. Here, we report a cost-effective way of preparing nanostructured Li(2)S-carbon composite cathodes by high-energy dry ball milling of commercially available micrometer-sized Li(2)S powder together with carbon additives. A simple but effective electrochemical activation process was used to dramatically improve the utilization and reversibility of the Li(2)S-C electrodes, which was confirmed by cyclic voltammetry and electrochemical impedance spectroscopy. We further improved the cycling stability of the Li(2)S-C electrodes by adding multiwalled carbon nanotubes to the nanocomposites. With a very high specific capacity of 1144 mA·h·g(-1) (98% of the theoretical value) obtained at a high Li(2)S content (67.5 wt %), the estimated specific energy of our cell was ∼610 W·h·kg(-1), which is the highest demonstrated so far for the Li/Li(2)S cells. The cells also maintained good rate capability and improved cycle life. With further improvement in capacity retention, nanostructured Li(2)S-C composite cathodes may offer a significant opportunity for the development of rechargeable cells with a much higher specific energy.

Research on S-containing Composite Cathode Material for Lithium Rechargeable Battery

Sulfur Composite Cathode Materials for Rechargeable Lithium Batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Study on electrochemical property of carbon-sulfur nano-composite material as cathode

Electrochemical Characteristics of Sulfur Composite Cathode Materials in Rechargeable Lithium Batteries

In situ synthesis of lithium sulfide–carbon composites as cathode materials for rechargeable lithium batteries

Sulfur–carbon Nano-Composite As Cathode for Rechargeable Lithium Battery Based on Gel Electrolyte

Sulfur carbon composite cathodes for rechargeable lithium battery

The Electrochemical Characteristics of Sulfur Composite Cathode

Preparation and Electrochemical Evaluation of Porous Carbon-Sulfur Composite Cathode Materials for High Performance Lithium/Sulfur Cells

Sulfur-Based Composite Cathode Materials for High-Energy Rechargeable Lithium Batteries

Polymer lithium cells with sulfur composites as cathode materials

A Se/C composite as cathode material for rechargeable lithium batteries with good electrochemical performance

Nanostructured Li₂S-C Composites As Cathode Material for High-Energy Lithium/sulfur Batteries.

Preparation and electrochemical properties of novel composite cathode materials for the advanced lithium rechargeable batteries

Analysis of the synthesis process of sulphur-poly(acrylonitrile)-based cathode materials for lithium batteries

Electrochemical Characteristics and Intercalation Mechanism of ZnS/C Composite As Anode Active Material for Lithium-Ion Batteries

High Molecular Weight Polyacrylonitrile Precursor for S@pPAN Composite Cathode Materials with High Specific Capacity for Rechargeable Lithium Batteries.

Review of Sulfur-Based Cathodes for High Performance Lithium Rechargeable Batteries

A New Process of Preparing Composite Microstructure Anode for Lithium Ion Batteries

Preparation and Performance of a Sulfur/graphene Composite for Rechargeable Lithium-Sulfur Battery