Abstract:The deformation of closed-cell aluminum foam (CAF) in different solid–liquid–gas coexisting state was studied in this paper. The results showed that the most suitable temperature of the CAF deformation was about 635 °C, which made the CAF have maximum deformation, but its characteristic parameters changed slightly. Moreover, the multi-grain cell wall and small size cell were helpful to the CAF deformation in the solid–liquid–gas coexisting state. When the CAF deformed at 635 °C, the inter-granular solidification microstructure and part of the primary α-Al grain were melted into liquid. The fixed or inter-locked primary α-Al grain was released and changed into the distributed discretely near-spherical grain, making the cell wall have good thixotropy. At the same time, the gas pressure in the cell was recovered to the foaming stage, so the gas pressure could be close to the flow stress of cell wall. During the CAF deformation in the solid–liquid–gas coexisting state, the cell wall deformed in thixotropic under the supporting and coordinating of the gas pressure in the cell, meanwhile, the cell was moved following the cell wall deformation. Therefore, the CAF deformation was affected by the types of the cell walls and the cell size. Graphic Abstract In this paper, the mold forming process was used to study the influence of temperature on deformation of the closed-cell aluminum foam (CAF) that in solid–liquid–gas coexisting state. When the CAF was deformed in solid–liquid–gas coexisting state who has strong deformation capacity, moreover, whose characteristic parameters are largely unchanged. However, shape forming of the closed cell aluminum foam only could be realized in specific solid–liquid–gas coexisting state, which was mainly related to the deformation temperature.

Experimental and Numerical Study on Strain Rate Effects of Close-Celled Aluminum Foams

Numerical investigation of influences of porous density and strain-rate effect on dynamical responses of aluminum foam

Study on the Compression Properties and Deformation Failure Mechanism of Open‐Cell Copper Foam

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

Mechanical Properties of Aluminium Foam and How Density, Temperature, and Strain Rate Affect Dynamic Strain–Stress Relationship

Coupling Effect Of Porosity And Cell Size On The Deformation Behavior Of Al Alloy Foam Under Quasi-Static Compression

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Effects of cell wall property on compressive performance of aluminum foams

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

High temperature and mesostructure effect on aluminum foam compression responses

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Study on Deformation of Closed-Cell Aluminum Foam in Different Solid–Liquid–Gas Coexisting State

Size effects in the constrained deformation of metallic foams

Three-dimensional Voronoi-based simulation study of stepwise density-graded aluminum foams: Buffering and energy absorption performance analysis

Creep of Closed-Cell Aluminum Foams: Effects of Imperfections and Predictive Modeling