Abstract:In the present work, a novel poly(arylene ether ketone) with a unique molecular design that included concentrated flexible sulfoalkyl groups and a silane cross-linked network (C-SPAEK) was prepared and used as a PEM for DMFCs. The chemical structures, sulfonation degree and phase-separated morphology were characterized and identified by 1 H NMR, FT-IR and SAXS. The resulting copolymers exhibited excellent thermal stability (T 5% >263.8 °C) and mechanical properties (tensile strength>52.88 MPa). Additionally, the high IEC values and obvious hydrophilic/hydrophobic phase-separated structure (d > 2.71 nm) ensured that the C-SPAEK membranes possessed high proton conductivities . The C-SPAEK PEMs also displayed enhanced methanol resistance and dimensional stability, which were much better than those of a recast Nafion membrane under the same conditions. The C-SPAEK-0.4 membrane maintained a low methanol absorption of less than 48.7%, even in 4 M methanol solution. In particular, the C-SPAEK-0.6 membrane exhibited the best comprehensive performance, with a high proton conductivity (0.164 S cm −1 ), low methanol uptake (52.1%) and permeability (3.63 × 10 −7 cm 2 s −1 ), and maximum power density (83.2 mW cm −2 ), when immersed in 2 M methanol at 80 °C in a DMFC single-cell. These results suggested that the C-SPAEK membranes were sufficiently tough and had the potential to overcome the problems caused by the high methanol permeability of PEMs. The unique molecular design of C-SPAEK guaranteed a rare combination of high proton conductivity and enhanced methanol resistance, which are the key determining factors for DMFC applications.

Proton conducting CS/P(AA-AMPS) membrane with reduced methanol permeability for DMFCs

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Proton Conducting Membranes Prepared by Incorporation of Organophosphorus Acids into Alcohol Barrier Polymers for Direct Methanol Fuel Cells

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Crosslinked SPEEK/AMPS Blend Membranes with High Proton Conductivity and Low Methanol Diffusion Coefficient for DMFC Applications

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Proton Conductive Channel Optimization In Methanol Resistive Hybrid Hyperbranched Polyamide Proton Exchange Membrane

A New Proton Conducting Membrane Based on Copolymer of Methyl Methacrylate and 2-Acrylamido-2-methyl-1-propanesulfonic Acid for Direct Methanol Fuel Cells

Novel Methanol-Blocking Proton Exchange Membrane Achieved Via Self-Anchoring Phosphotungstic Acid into Chitosan Membrane with Submicro-Pores

PA-doped nanofiber composite proton exchange membranes with ultrahigh proton conductivity and methanol barrier performance for direct methanol fuel cells

Proton Exchange Membrane Based on Crosslinked Sulfonated Polyphosphazene Containing Pendent Perfluorosulfonic Acid Groups with Sulfonated Poly(Ether Ether Ketone)

Methanol Tolerable Ultrathin Proton Exchange Membrane Fabricated Via In-Situ Ionic Self-Crosslinking Strategy for High-Performance Dmfcs

Zwitterion-functionalized nanofiber-based composite proton exchange membranes with superior ionic conductivity and chemical stability for direct methanol fuel cells

Novel Pore-Filling Membrane Based on Block Sulfonated Poly (ether Sulphone) with Enhanced Proton Conductivity and Methanol Resistance for Direct Methanol Fuel Cells

Design of a stable and methanol resistant membrane with cross-linked multilayered polyelectrolyte complexes for direct methanol fuel cells

Click Chemistry‐based Azide‐substituted Polysulfone/alkynyl‐substituted Sulfonated Polyvinyl Alcohol/nafion Blend Membranes for Direct Methanol Fuel Cells

A Facile Method to Construct Highly Efficient Methanol Resistive Polyamide-Based Proton Exchange Membrane

Silane cross-linked network and concentrated flexible sulfoalkyl groups for forming a novel C-SPAEK membrane with enhanced methanol resistance and proton conductivity for DMFC applications

New Proton Exchange Membranes Based on Poly (vinyl Alcohol) for Dmfcs

Dimethylamine-tuned guanidinium arylphosphonate iHOFs and superprotonic conduction Nafion hybrid membranes for DMFCs