Abstract:In this context, we report a novel one-pot synthesis of S@Polypyrrole core-shell spheres as the cathode material in lithium-sulfur battery, designed by polypyrrole (PPy) wrapping on the formed nano-sulfur via the facile wet chemical strategy. The in-situ polymerized PPy layer in this special structure is helpful to inhibit aggregation of sulfur particles with small size, the polysulfide dissolution and shuttling, and offer fast and efficient transport of electron/lithium ion within the electrode. Besides, the flexible PPy layer effectively accommodates the volume expansion. PPy with partial PO43- doping was also employed to improve cycling stability and C-rate performance of S@PPy composite by exchanging a with PO43-. Thus, the sulfur electrode with a high sulfur loading of 80% delivered an initial discharge capacity of 1142 mA h g(-1) and maintained a high capacity of 805 mA h g(-1) after 50 cycles at 0.1 C. The corresponding capacity retention over 100 cycles was about 65%, with a limited decay of 0.3% per cycle. Even at a high current density of 1.5 C, the composite still exhibited a high discharge capacity of about 700 mA h g(-1). This results mean that the designed electrode can achieve a high practical specific energy density of more than 400 W h/kg, far beyond the commercial LiCoO2 batteries. Due to low cost, facile large-scale synthesis and superior electrochemical performance of S@PPy cathode with high sulfur loading, this work will provide a very promising method to further promote the Li-S batteries in the practical application of portable electronic devices, electric devices and energy storage system. (C) 2016 Elsevier Ltd. All rights reserved.

Preparation and enhanced electrochemical properties of nano-sulfur/poly(pyrrole-co-aniline) cathode material for lithium/sulfur batteries

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

Synthesis and Electrochemical Performance of Polypyrrole-Coated Sulfur/Multi-Walled Carbon Nanotube Composite Cathode Materials for Lithium/Sulfur Batteries

Nano-wire Networks of Sulfur–polypyrrole Composite Cathode Materials for Rechargeable Lithium Batteries

Core-Shell Sulfur@Polypyrrole Composites As High-Capacity Materials for Aqueous Rechargeable Batteries

Improved Electrochemical Performance of Li-S Battery with Carbon and Polymer-Modified Cathode

In Situ Polymerization Synthesis of Ternary Sulfur/Polypyrrole/Graphene Nanosheet Cathode for Lithium/Sulfur Batteries

Sulfur Composite Cathode Materials for Rechargeable Lithium Batteries

Porous sulfurized poly(acrylonitrile) nanofiber as a long-life and high-capacity cathode for lithium–sulfur batteries

Electrochemical Synthesis of TiO2-polypyrrole Nanocomposites and an Application to Lithium Sulfur Battery

A Polyaniline‐Coated Sulfur/Carbon Composite with an Enhanced High‐Rate Capability As a Cathode Material for Lithium/Sulfur Batteries

Polypyrrole-modified carbon nanotubes@manganese dioxide@sulfur composite for lithium–sulfur batteries

S@TiO2 Nanospheres Loaded on PPy Matrix for Enhanced Lithium-Sulfur Batteries

Facile Large-Scale Synthesis of Core–shell Structured Sulfur@polypyrrole Composite and Its Application in Lithium–sulfur Batteries with High Energy Density

Synergistic Effect of Tubular Amorphous Carbon and Polypyrrole on Polysulfides in Li-S Batteries

Polyaniline-modified Cetyltrimethylammonium Bromide-Graphene Oxide-Sulfur Nanocomposites with Enhanced Performance for Lithium-Sulfur Batteries

Hollow spherical carbonized polypyrrole/sulfur composite cathode materials for lithium/sulfur cells with long cycle life

Fabrication of polypyrrole coated cobalt manganate porous nanocubes by a facile template precipitation and annealing method for lithium–sulfur batteries

A novel sulfurized polypyrrole composite for high-performance lithium-sulfur batteries based on solid-phase conversion

Sulfur Impregnation in Polypyrrole-Modified MnO2 Nanotubes: Efficient Polysulfide Adsorption for Improved Lithium-Sulfur Battery Performance

Polyaniline-Coated S/Super-P Composites As Cathode Materials for High Performance Lithium-Sulfur Batteries