Abstract:In this context, we report a novel one-pot synthesis of S@Polypyrrole core-shell spheres as the cathode material in lithium-sulfur battery, designed by polypyrrole (PPy) wrapping on the formed nano-sulfur via the facile wet chemical strategy. The in-situ polymerized PPy layer in this special structure is helpful to inhibit aggregation of sulfur particles with small size, the polysulfide dissolution and shuttling, and offer fast and efficient transport of electron/lithium ion within the electrode. Besides, the flexible PPy layer effectively accommodates the volume expansion. PPy with partial PO43- doping was also employed to improve cycling stability and C-rate performance of S@PPy composite by exchanging a with PO43-. Thus, the sulfur electrode with a high sulfur loading of 80% delivered an initial discharge capacity of 1142 mA h g(-1) and maintained a high capacity of 805 mA h g(-1) after 50 cycles at 0.1 C. The corresponding capacity retention over 100 cycles was about 65%, with a limited decay of 0.3% per cycle. Even at a high current density of 1.5 C, the composite still exhibited a high discharge capacity of about 700 mA h g(-1). This results mean that the designed electrode can achieve a high practical specific energy density of more than 400 W h/kg, far beyond the commercial LiCoO2 batteries. Due to low cost, facile large-scale synthesis and superior electrochemical performance of S@PPy cathode with high sulfur loading, this work will provide a very promising method to further promote the Li-S batteries in the practical application of portable electronic devices, electric devices and energy storage system. (C) 2016 Elsevier Ltd. All rights reserved.

In Situ Polymerization Synthesis of Ternary Sulfur/Polypyrrole/Graphene Nanosheet Cathode for Lithium/Sulfur Batteries

Synthesis and Electrochemical Performance of Polypyrrole-Coated Sulfur/Multi-Walled Carbon Nanotube Composite Cathode Materials for Lithium/Sulfur Batteries

A Novel Binder-Free Sulfur/Polypyrrole Cathode for Lithium/Sulfur Batteries

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

Nanosulfur/polyaniline/graphene composites for high-performance lithium–sulfur batteries: One pot in-situ synthesis

A novel lithium/sulfur battery based on sulfur/graphene nanosheet composite cathode and gel polymer electrolyte

3D Porous Spherical Sulfur/Carbon Cathode Materials with in Situ Vapor-Phase Polymerized Polypyrrole Coating Layer for High-Performance Lithium–Sulfur Batteries

Ternary Graphene/sulfur/sio2 Composite As Stable Cathode for High Performance Lithium/sulfur Battery

Interface polymerization synthesis of conductive polymer/graphite oxide@sulfur composites for high-rate lithium-sulfur batteries

Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries

Polypyrrole-modified carbon nanotubes@manganese dioxide@sulfur composite for lithium–sulfur batteries

In Situ Polymerization of Nanostructured Conductive Polymer on 3D Sulfur/Carbon Nanofiber Composite Network as Cathode for High‐Performance Lithium–Sulfur Batteries

A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries

High Sulfur Loading Composite Wrapped By 3d Nitrogen-Doped Graphene As A Cathode Material For Lithium-Sulfur Batteries

Crosslinked Polypyrrole Grafted Reduced Graphene Oxide-Sulfur Nanocomposite Cathode for High Performance Li-S Battery

A MnO 2 /Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries.

Graphene Oxide-Polypyrrole Composite As Sulfur Hosts for High-Performance Lithium-Sulfur Batteries

Uniform Polypyrrole Layer-Coated Sulfur/Graphene Aerogel Via the Vapor-Phase Deposition Technique As the Cathode Material for Li-S Batteries

Facile Large-Scale Synthesis of Core–shell Structured Sulfur@polypyrrole Composite and Its Application in Lithium–sulfur Batteries with High Energy Density

Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li-S batteries

Construction of polypyrrole coated hollow cobalt manganate nanocages as an effective sulfur host for lithium-sulfur batteries