Abstract:Materials with high specific strength and toughness are urgently needed in the fields of electronic packaging, armor, and aerospace. SiC/Al composites show good potential for these applications but the problem of mutual exclusion of strength and toughness still needs to be solved. Herein, we propose a new strategy to simultaneously enhance its strength and toughness from the perspective of structural optimization and interface enhancement. Inspired by the nacre structure, a 3D-(SiC-Si3N4)/Al co-continuous composite was prepared by freeze-casting combined with the pressure infiltration method. During the process, elongated Si3N4 grains were introduced into the ceramic framework to design the internal lamella wall structure and increase the contact area with the aluminum substrate. Moreover, a favorable interfacial bonding was designed between Si3N4 and Al to improve interface wettability. The reliable microstructure of porous 3D-(SiC-Si3N4) preform was tailored through the adjustment of initial solid loading and the alpha-Si3N4 component. The effects of initial solid loading and the alpha-Si3N4 component on the microstructure, interfacial wettability, and mechanical properties of the final composites were investigated. The results showed that the SiC-Si3N4/Al composites possess high flexural strength (769 MPa) and fracture toughness (15.1 MPa m1/2), which is superior to data reported in general literature. Numerous elongated beta-Si3N4 grains are produced on the ceramic skeleton, forming an interlocking structure with the aluminum matrix, which increases the contact area with the aluminum substrate. A chemical reaction layer was formed at the interface of the composite, greatly improving the interfacial bonding strength. This work provides a promising design guideline for developing and optimizing high-strength and tough composite.

Toughening alumina with layered Ti3SiC2 inclusions

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Fabrication of Al2O3–Ti3SiC2 Composites and Mechanical Properties Evaluation

Preparation and toughness mechanism of in-situ Ti<sub>3</sub>AlC<sub>2</sub> enhanced and toughened TiAl<sub>3</sub> matrix composites

Ultra-toughened Al2O3–TiC–Co ceramic

Preparation and toughness mechanism of in-situ Ti3AlC2 enhanced and toughened TiAl3 matrix composites

Mechanical Properties and Microstructure of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Ceramic Composites

Strong and Tough 3D-(Sic-si3n4)/al Co-Continuous Composite with Enhanced Interfaces

Strengthening and toughening of laminated TiAl composite sheets by titanium alloy layers and carbide particles

Toughening And Reinforcing Alumina Matrix Composite With Single-Wall Carbon Nanotubes

Alumina ceramics toughened by a piezoelectric secondary phase

Effect of Composition on Properties of Alumina/Titanium Silicon Carbide Composites

Fabrication and mechanical properties of nacre-like alumina with addition of silicon nitride

Ultratough conductive graphene/alumina nanocomposites

Fabrication of Strong and Tough Alumina Ceramic with Isotropic Textured Microstructure at Low Temperature

Microstructure-toughening Relation in Alumina Based Multiwall Carbon Nanotube Ceramic Composites

Fabrication of novel alumina composites reinforced by SiC nano-particles and multi-walled carbon nanotubes

Enhanced Mechanical Properties in Ceramic Multilayer Composites Through Integrating Crystallographic Texture and Second-Phase Toughening

Preparation and Properties of Ternary Ti3AlC2 and Its Composites from Ti–Al–C Powder Mixtures with Ceramic Particulates

MXene-toughened Al2O3 ceramic at high temperature

Hybrid nanocomposites: A new route towards tougher alumina ceramics