Abstract:The evolution of the fiber-delivery laser-produced plasma induced by a single-lens laser probe and a double-lens laser probe were compared to the direct-focusing laser-produced plasma. It is found that the laser profile of the focused spot emitted by the fiber was uniform, showing a top-hat profile, with significant energy dispersion (standard deviation was increased to 1.2 from 0.76 and peak irradiance was decreased to 18.6 GW/cm(2) from 28.2 GW/cm(2)). Using the method of photography with an effective 3-ns exposure time, the fiber-delivery laser-produced plasma displayed obvious changes in plasma morphology from a hemispherical form to a flat hemispherical form, even an oblate-cylinder form. Via optical emission spectroscopy, it was obvious the duration of the N II emission was shortened by 50-120 ns, and the axial diffusion distance was also reduced by 0.2 mm. By combining shadow diagnostics and fast photography, it appeared clear that the shock wave was slowed down to 1.9-2.1 km/s, and was separated from the plasma plume with a longer delay of 500-600 ns. In addition, the fringe shift profiles recovered from Mach-Zehnder interferograms showed a lower electron density inside the plasma plume and a weaker degree of air disturbance at the shock wave position, consistent with the other diagnosis methods. These different evolutionary characteristics in the case of the fiber-delivery mode clearly indicated that the peak irradiance would also have a pronounced effect on the plasma process in addition to the average irradiance. This phenomenon could be related to the reduction in energy deposition of laser absorption by plasma for the fiber-delivery mode, and this reduction was caused by the decreased peak irradiance in the focused spot.

Investigation on Fm-To-Am Conversation of the Optical Flat Plates in Complex Laser Systems

Research of Frequency Modulation to Amplitude Modulation with Multi-Frequency Modulation

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Analysis of the Unbalanced Sidebands of Phase Modulation

Travelling wave analysis on high-speed performance of Q-modulated distributed feedback laser.

High-frequency Characterization of an Optical Phase Modulator with Phase Modulation-to-intensity Modulation Conversion in Dispersive Fibers

Impact of laser linewidth on performance of externally modulated optical transmission systems

Optimization of smoothing by spectral dispersion with a sinusoidal phase modulation

High Frequency Modulation Characteristic Analysis of Wavelength Conversion Based on External Cavity Laser

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

High-speed modal analysis of dynamic modal coupling in fiber laser oscillator

Laser Beam Radius Modulation for Linear Optoacoustic Communication

Analysis of linear and non-linear effects in the frequency domain for a three-channel optical transmission system

Numerical Analysis Of Four-Wave-Mixing Based Multichannel Wavelength Conversion Techniques In Fibers

Investigation on the thermal blooming effect in a high power spectral beam combining fiber laser system

Comparisons of Laser-Produced Plasma in Atmosphere Between Fiber-Delivery and Direct-Focusing Laser Pulse

Study on the Emission Source of Laser Video Communication

Research on modulation performance of the "seed laser" in emission source of FM-CW ladar

Research on Ultra-High-Speed Satellite Visible Light Laser Communication Technology(Invited)

Research on target uniform irradiation method using linearly modulated light and special grating dispersion

Suppression of Fm-To-Am Conversion in Broadband Third-Harmonic Generation of Nd:Glass Laser