Abstract:As optical networks advance toward a dynamic multiwavelength all-optical structure, all optical wavelength conversion technologies become vital in the efficient utility of available fiber bandwidth. Experimental demonstrations of optical wavelength conversion usually involves a nonlinear element to transfer the information from the signal wavelength to that of a local laser source. In the case of Non-return-to-zero (NRZ) signals, the local laser source is usually a CW narrow linewidth semiconductor laser. For Return to Zero (RZ) signals, the local laser sources commonly employ a modelocked fiber laser or a modelocked semiconductor laser or a gain switched DFB to generate low jitter optical clock. Various materials and devices can be used as the nonlinear element for wavelength conversion, with the two most common being the optical fiber and semiconductor optical amplifier, though Lithium Niobate has also attracted attention in recent years as a switching element. The advantage of using optical fiber for wavelength conversion is that it is relatively cheap and has low levels of noise. However, the switching energy required to generate the nonlinearity in optical fiber is high compared to that of the SOA [1]. Wavelength conversion using SOA typically uses either four-wave mixing or crosses gain/phase modulation, with the latter method often used in conjunction with an interferometric topology [2]. The advantages of cross phase modulation of SOA in interferometers are the relatively low switching energy required, the fast switching speed, and the ability to integrate the whole structure on a single substrate.

High Frequency Modulation Characteristic Analysis of Wavelength Conversion Based on External Cavity Laser

Effects of Semiconductor Laser Structure on All Optical Wavelength Conversion Rate

All-Optical Wavelength Conversion Using Widely Tunable V-Cavity Semiconductor Laser

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

All-Optical Wavelength Conversion Based on Tunable V-Cavity Laser

Rate Equation Analysis of High Speed Q-Modulated Semiconductor Laser

Modeling Analysis of All-Optical Wavelength Conversion Using Injection-Locked Semiconductor Lasers

The Study on the Performance of the Wavelength Conversion Based on a Tunable External Cavity Semiconductor Laser

Modeling of Widely Tunable V-cavity Semiconductor Laser Using Time-Domain Traveling-Wave Method

All-Optical Wavelength Conversion Using Optical Injection Induced Wavelength Switching In V-Cavity Laser

Monolithically Integrated Channel-selectable Wavelength Converter Based on XAM and Q-modulation Principle

Wavelength Conversion Using SOAs: Simulations and Experiment

Wavelength conversion techniques for optical networks

Direct Modulation of Widely Tunable V-Cavity-Laser for Low-Cost WDM Access Networks

Wavelength Conversion of Spectrum-Sliced Broadband Amplified Spontaneous Emission Light by Hybrid Four-Wave Mixing in Highly Nonlinear, Dispersion-Shifted Fibers.

Performance of Wavelength Division Multiplexing System Based on V-Cavity Semiconductor Laser

Proposal for $Q$ -Modulated Semiconductor Laser

Flattening of Cascaded Sum- and Difference-Frequency Generation-Based Wavelength Conversion by Pump or Period Detuning

Wavelength switchable semiconductor laser using half-wave V-coupled cavities.

NOISE CHARACTERISTICS AND PERFORMANCE ANALYSIS OF WAVELENGTH CONVERTERS BASED ON CROSS-GAIN MODULATION IN SEMICONDUCTOR OPTICAL AMPLIFIERS

Travelling wave analysis on high-speed performance of Q-modulated distributed feedback laser.