Abstract:As a common ILs anion, dicyandiamide ILs is widely used in deep desulfurization and denitrogenation of fuel oil. In this study, two types of dicyandiamide salts containing cations with different carbon chain lengths were selected, 1-Ethyl-3-methylimidazolium dicyanamide ([EMIM]DCN) and 1-Butyl-3-methylimidazolium dicyanamide ([BMIM]DCN) were selected to investigate. However, under air conditions, the thermal effects of the two ILs are opposite. Therefore, the relationship between carbon chain length and the thermal stability and pyrolysis mechanism of ILs deserves further research. The thermal stability, exothermic properties and pyrolysis mechanism of the two substances under air conditions using simultaneous thermogravimetric analyzer measurements (STA), differential scanning calorimetry (DSC) and fourier transform infrared spectroscopy (FTIR). Through thermogravimetric experiments, it was found that the apparent activation energies of [EMIM]DCN and [BMIM]DCN were 120 kJ mol −1 and 101 kJ mol −1 , respectively. This explain that the carbon chain length is inversely proportional to the thermal stability of ILs. DSC shows that [BMIM]DCN has three exothermic stages and emits a total of 2075.67 J g −1 heat, while [EMIM]DCN has one endothermic stage and one exothermic stage, releasing 343.44 J g −1 heat, compared to [BMIM]DCN, [EMIM]DCN is clearly more secure. Through FTIR experiments, it was found that due to the longer and less stable carbon chain of [BMIM]DCN, it is more prone to oxidative exothermic generation of CO 2 , thus [BMIM]DCN exhibits exothermic behavior in the first stage of DSC experiments. The carbon chain of [EMIM]DCN is relatively short and stable, so it fails to oxidize to generate sufficient CO 2 in the first stage and needs to absorb heat to generate isocyanates. In the third stage, due to the increase in temperature, the carbon atoms of [EMIM]DCN and [BMIM]DCN are oxidized and converted into CO 2 , releasing enormous heat, which explains the huge exothermic phenomenon in the final DSC experiment.

Heat Capacity and Thermal Decomposition of Dicyandiamide

Prediction of Heat of Formation for Exo -Dicyclopentadiene

Solid–liquid Equilibrium of Dimethyl Terephthalate(dmt), Dimethyl Isophthalate(dmi) and Dimethyl Phthalate(dmp) in Melt Crystallization Process

Low-temperature Heat Capacities and Thermodynamic Properties of Mn-3(HEDTA)(2)center Dot 10H(2)O

Heat capacity and thermal decomposition of 1,6-bis(diphenylphosphino)hexane

Thermal Analysis of Spider Silk Inspired Di-Block Copolymers in the Glass Transition Region by TMDSC

Thermokinetic Studies of Dicumyl Peroxide

Thermal Stability and Thermal Degradation Reaction Kinetics of 4,4 '-Diphenylmethane Diisocyanatetrimer

Thermal Behavior of Pentaerythritol Diazido Dinitrate

Evaluation of the thermal stability and pyrolysis mechanism of 1-ethyl-3-methylimidazolium dicyanamide and 1-Butyl-3-methylimidazolium dicyanamide by STA, DSC, TG-FTIR

Thermal Decomposition Mechanism of P(DAC-AM) with Serial Cationicity and Intrinsic Viscosity

Thermal and Crystalline Properties of Random Copolymer of CL and DTC Prepared by La(OAr)3

Study on the Thermal Stability of Dicumyl Peroxide

Low-Temperature Heat Capacity and Thermodynamic Properties of Crystalline 2-Chloro-5-trichloromethylpyridine

Thermal decomposition mechanisms of energetic CL-20-based co-crystals: quantum molecular dynamics simulations

Kinetics on Thermal Dissociation and Oligomerization of Dicyclopentadiene in a High Temperature & Pressure Microreactor

Thermolysis of Β-Cyclodextrin/alkylcobaloxime Inclusion Complexes in the Solid State

DFT and TST Study of the Calcium Cyanamide Process for Synthesizing Cyanamide and Dicyandiamide

Heat Capacity and Thermodynamic Properties of Crystalline 2‐Chloro‐n,n‐dimethylnicotinamide

Thermal Decomposition Characteristic and Kinetics of DINA

Thermal Analysis of a New Heat-Resistant Energetic Material