Abstract:Thermoplastic biodegradable polymers displaying an elastomeric behavior are greatly valued for the regeneration of soft tissues and for various medical devices. In this work, terpolymers composed of ε-caprolactone (CL), D-lactide (D-LA), and L-lactide (L-LA) were synthesized. These poly(lactide-ε-caprolactone) (PLCLs) presented an elevated randomness character (R∼1), glass transition temperatures (Tg ) higher than 20°C and adjusted L-LA content. In this way, the L-LA average sequence length (/L-LA ) was reduced to below 3.62 and showed little or no crystallization capability during in vitro degradation. As a result, the obtained materials underwent homogenous degradation exhibiting KMw ranging from 0.030 to 0.066 d(-1) and without generation of crystalline remnants in advanced stages of degradation. Mechanical performance was maintained over a period of 21 days for a rac-lactide-ε-caprolactone copolymer composed of ∼85% D,L-LA and ∼15% CL and also for a terpolymer composed of ∼72% L-LA, ∼12% D-LA and ∼16% CL. Terpolymers having L-LA content from ∼60 to 70% and CL content from ∼10 to 27% were also studied. In view of the results, those materials having CL and D-LA units disrupting the microstructural arrangement of the L-LA crystallizable chains, an L-LA content <72% and a random distribution of sequences, may display proper and tunable mechanical behavior and degradation performance for a large number of medical applications. Those with a CL content from 15 to 30% will fulfill the demand of elastomeric materials of Tg higher than 20°C whereas those with a CL content from 5 to 15% might be applied as ductile stiff materials.

Thermal and Crystalline Properties of Random Copolymer of CL and DTC Prepared by La(OAr)3

Crystallization Behavior and Mechanical Properties of Poly(Epsilon-Caprolactone)/Cyclodextrin Biodegradable Composites

Effect of Crystallization Temperature on Crystal Modifications and Crystallization Kinetics of Poly(l‐lactide)

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Isothermal Crystallization of Random Copolymers of Ε-Caprolactone with 2,2-Dimethyltrimethylene Carbonate

The crystallization kinetics of Poly (ε-caprolactone-co-trimethylene carbonate) (PCLTMC): effects of the molar ratio of CL and TMC

Preparation and Polymerization Mechanism of Dihydroxy-Capped PCL, Poly(cl- B -PEG- B -CL) and Poly(dtc- B -CL- B -DTC)

Solution Crystallization Behavior Of Crystalline-Crystalline Dibloek Copolymers Of Poly(Ethylene Oxide)-Block-Poly(Epsilon-Caprolactone)

Crystal Orientation and Melting Behavior of Poly( Ɛ -Caprolactone) under One-Dimensionally “hard” Confined Microenvironment

Polymerization characteristics of epsilon-caprolactone at low temperature by lanthanum tris(2,6-di-tert-butyl-4-methylphenolate) and the block copolymerization of epsilon-caprolactone with cyclic carbonates

Ring-opening Polymerizaion of 2,2-Dimethyltrimethylene Carbonate Initiated by in Situ Generated, Tetrahydrosalen Stablized Yttrium Borohydride Complex and Random Copolymerization with Ɛ -Caprolactone

Synthesis and Properties of Random Copolymers of 2,2-Dimethyltrimethylene Carbonate and Ethylene Carbonate Catalyzed by Lanthanide Tris(2,6-Di-Tert-Butyl-4-Methylphenolate)

CONTROLLED RELEASE OF SALICYLIC ACID FROM ELECTROSPUN MATS OF POLY(Ε-CAPROLACTONE) WITH LOW CRYSTALLINITY

Random Copolymerization of 2,2‐dimethyltri Methylene Carbonate and Ε‐caprolactone Using a Rare‐earth Tris(4‐tert‐butylphenolate)s As a Single‐component Initiator

Homo-and Copolymerization of Ε-Caprolactone and 2,2-Dimethyltrimethylene Carbonate by Rare Earth Initiators

Crystallization Behavior of Triarm Poly(propylene oxide block L-lactide) Copolymer

Thermal Behavior of Poly(Trimethylene-Co-Ethylene Terephthalate)

A New Generation of Poly(lactide/ε-Caprolactone) Polymeric Biomaterials for Application in the Medical Field.

Studies on the Thermal-Properties of Caprolactam Long-Chain Lactam Copolymer

Crystallization Process of Poly(ɛ-Caprolactone)–poly(ethylene Oxide)–poly(ɛ-Caprolactone) Investigated by Infrared and Two-Dimensional Infrared Correlation Spectroscopy

Crystalline Morphologies and Molecular Orientation of Poly(ε-caprolactone) Thin Films