Abstract:Warm deformation is a plastic-forming process that differs from traditional cold and hot forming techniques. At the macro level, it can effectively reduce the problem of high deformation resistance in cold deformation and improve the surface decarburization issues during the hot deformation process. Microscopically, it has significant advantages in controlling product structure, refining grain size, and enhancing product mechanical properties. The Gleeble-1500D thermal-mechanical physical simulation system was used to conduct isothermal compression tests on GCr15 bearing steel. The tests were conducted at temperatures of 600-1050 °C and strain rates of 0.01-5 s-1. Based on the experimental data, the critical strain model and dynamic recrystallization model for the warm-hot forming of GCr15 bearing steel were established in this paper. The model accuracy is evaluated using statistical indicators such as the correlation coefficient (R). The dynamic recrystallization model exhibits high predictive accuracy, as indicated by an R-value of 0.986. The established dynamic recrystallization model for GCr15 bearing steel was integrated into the Forge® 3.2 numerical simulation software through secondary program development to simulate the compression process of GCr15 warm-hot forming. The dynamic recrystallization fraction was analyzed in various deformation regions. The grain size of the severe deformation zone, small deformation zone, and difficult deformation zone was compared based on simulated compression specimens under the conditions of 1050 °C and 0.1 s-1 with the corresponding grain size obtained with measurement based on metallographic photos; the relative error between the two is 5.75%. This verifies the accuracy of the established dynamic recrystallization and critical strain models for warm-hot deformation of GCr15 bearing steel. These models provide a theoretical basis for the finite element method analysis and microstructure control of the warm-hot forming process in bearing races.

FEM Modeling of Dynamical Recrystallization During Multi-Pass Hot Rolling of AM50 Alloy and Experimental Verification

Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process

An Integrated Simulation of Multiple-Pass U-10Mo Alloy Hot Rolling and Static Recrystallization

Modelling of Dynamic Recrystallization in Hot Working

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation

Microstructure simulation and experiment investigation of dynamic recrystallization for ultra high strength steel during hot forging

Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod

Multi-scale Modeling and Simulation for Multi-Pass Processing of Ta-2.5 W Alloy

Modeling the Effects of Processing Parameters on Dynamic Recrystallization Behavior of Deformed 38mnvs6 Steel

Simulation of the FGH96 Superalloy Microstructural Changes under Different Deformation Conditions

The dynamic recrystallization behavior of the Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr titanium alloy during hot rolling based on macro-meso multiscale crystal plasticity finite element approach

FE simulation of multi-pass reversible hot rolling of GH4169 alloy plate

Simulation and Finite Element Analysis of Continuous Multi-Pass Hot Rolled AZ31B Magnesium Alloy Sheets

Numerical Simulation of Microstructure Evolution During Continuous Hot Rolling Process of GCr15 Steel Rod

Finite-element analysis of microstructure evolution in the hot deforming of TC4-DT alloy

Finite Element Analysis of Dynamic Recrystallization Model and Microstructural Evolution for GCr15 Bearing Steel Warm-Hot Deformation Process

Numerical Simulation of Microstructure Evolution for SA508-3 Steel During Inhomogeneous Hot Deformation Process

Numerical simulation of aluminum alloy hot rolling using DEFORM-3D

Modeling of Dynamic Recrystallization Evolution for Cr8 Alloy Steel and Its Application in FEM

Simulation of Microstructure Evolution During Hybrid Deposition and Micro-Rolling Process

Microstructure Evolution in Nb-Ti Micro-Alloyed Steel During Hot Compression and Hot Rolling Simulation