Abstract:Surface nanoengineering can significantly improve the mechanical properties and performance of metals, such as strength, hardness, fatigue, wear resistance, etc. In this work, we tailored the surface microstructure of GCr15 bearing steel within a thickness of approximately 800 μm using room temperature ultrasonic shot peening (USP) technology. Microstructure characterization studies reveal the formation of gradient nanosized spheroidal carbides and lath-shaped nano-martensite in the GCr15 bearing steel during the USP process. The micro-sized martensite structure (∼1.8 μm) in the as-received GCr15 bearing steel was refined to lath-shaped nano-martensite with a thickness of ∼10 nm. The USP-induced transformation of carbides and the segregation of carbon elements within the peened surface layer of the GCr15 bearing steel were clearly observed. The sizes of carbides were reduced from ∼800 nm to ∼460 nm during the USP treatment. These phenomena were primarily attributed to the interactions between dislocations and carbides, as well as the interfacial wear occurring between the carbides and the matrix materials. The segregation of carbon elements within the USP-treated sample was ascribed to the interplay between dislocations concentrated at grain boundaries and the ensuing carbon diffusion within the cementite phase. As a result of surface nanoengineering, the microhardness of the USP-treated GCr15 bearing steel was improved by approximately 30% compared to its as-received counterparts and a significant enhancement in wear resistance was achieved. The wear rate coefficient for USP-treated GCr15 bearing steel is reduced by 43.19% and 84.62% after 4 and 8 minutes of peening, respectively. This study paves the way for exciting advancements in nanoengineering metals for superior durability.

Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Nanoengineering steel's durability: creating gradient nanostructured spheroidal carbides and lath-shaped nano-martensite via ultrasonic shot peening

Surface Nanocrystallization Mechanism of Additive Manufactured 316L Stainless Steel Via High-Energy Shot Peening

Effect of Surface Impacting Parameters on Wear Resistance of High Manganese Steel

Nanoscale microstructural factors contributing to the improvement of the micromechanical wear properties of mechanical shot-peened nickel-based superalloys

Errosion-Corrosion Critical Performance of Surface Nanocrystalline 20 Carbon Steel in Condensate Water

Mechanical Properties and Formation Mechanism of Surface Hard Nanocrystalline Carbon Diffusion Layer on 18Cr2Ni4WA Steel Induced by Supersonic Fine Particle Bombarding

Effect of Surface Nanocrystallization on Wear Behavior of Steels: A Review

Effects of ultrasonic nanocrystal surface modification on the surface integrity, microstructure, and wear resistance of 300M martensitic ultra-high strength steel

Enhanced Wear Resistance of the Ultrastrong Ultrasonic Shot-Peened M50 Bearing Steel with Gradient Nanograins

Surface Characteristic and Friction Behavior of Plasma Sprayed FeCoNiCrMo0.2 High Entropy Alloy Coatings on BS960 High-Strength Steel with Subsequent Shot Peening Treatment

Surface self-nanocrystallization and -lubricating dependent wear resistance of austenitic steels at same initial hardness level

Revealing working hardening behavior and substructure evolutions of ultrahigh strength and enhanced wear resistance Fe–25Mn–7Al–1C steel treated by explosion processing

Effect of ultrasonic shot peening surface alloying on microstructure and tribological behavior of Inconel 718 superalloy

Microstructure and Characterization of Surface Nanocrystallization of Aluminum Alloy

Effect of Heat Treatment on the Cavitation Erosion Behavior of Nanocrystalline Surface Layer of 304 Stainless Steel

Wear Property and Wear Mechanisms of High-Manganese Austenitic Hadfield Steel in Dry Reciprocal Sliding

Surface hardening of NiTi shape memory alloy induced by the nanostructured layer after surface mechanical attrition treatment.

Microstructure and Nanoindentation Hardness of Shot-Peened Ultrafine-Grained Low-Alloy Steel

Effects of Ultrasonic Nanocrystal Surface Modification on Surface Hardening Mechanism and Wear Behavior of Additively Manufactured High-Manganese Steel