Abstract:There is a significant need to elucidate the underlying mechanisms of cyclic plastic damage mechanism for additively manufactured materials and develop effective surface modification techniques to improve their fatigue life. This study investigates the efficacy of ultrasonic surface rolling process (USRP) technology in the creation of a ∼300 μm gradient nanotwinned structure on the surface of additively manufactured CoCrNi medium-entropy alloy (AM-MEA), which results in a beneficial result that yield strength and 10 7 -cycle fatigue endurance limit are significantly improved, achieving the increment of 192.1 MPa and ∼130 MPa, respectively. The superior fatigue property is attributed to multiple factors that suppress crack initiation from sample surfaces jointly, including the presence of a gradient nanotwinned layer and the reduction in irregular defects located both on and beneath the surface. The cyclic plastic deformation behavior of AM-MEA samples with and without USRP under both high and low stress levels was studied in-depth through multiscale characterization techniques. When exposed to cyclic loading at a low stress level of 480 MPa, the fatigue damages of both samples were dominated by accumulation of statistical stored dislocations (SSDs) and persistent Lüders bands. There is no significant difference in the increase in dislocation density between both samples. However, under cyclic loading at a high stress level (660 MPa), the fatigue damage of the AM-MEA sample primarily originated from the accumulation of deformation nanotwins, stacking faults, geometrically necessary dislocations and SSDs. Conversely, the fatigue damage observed in the AM-MEA sample with USRP at the same stress level was dominant by an increase in stacking faults and SSDs. Notably, this increase in total dislocation density was visibly lower than that observed in the AM-MEA sample, which is ascribe to the stable gradient layer providing enhanced hetero-deformation induced stress for the core region in the AM-MEA sample with USRP at high stress level.

Effects of Ultrasonic Nanocrystal Surface Modification on Surface Hardening Mechanism and Wear Behavior of Additively Manufactured High-Manganese Steel

Effects of ultrasonic nanocrystal surface modification on the surface integrity, microstructure, and wear resistance of 300M martensitic ultra-high strength steel

Hardening mechanism of high manganese steel during impact abrasive wear

Effect of Surface Impacting Parameters on Wear Resistance of High Manganese Steel

Microstructure and mechanical properties of CoCrFeMnNi high entropy alloy with ultrasonic nanocrystal surface modification process

Enhanced Abrasion Resistance of Spark Plasma Sintered and HVOF Sprayed Hadfield High Manganese Steel by Turning and Diamond Smoothing

Effect of progressive solid-solution treatment on microstructures, mechanical properties and impact abrasive wear behavior of alloyed high manganese steel

A Study on Surface Hardening and Wear Resistance of AISI 52100 Steel by Ultrasonic Nanocrystal Surface Modification and Electrolytic Plasma Surface Modification Technologies

The Effects of Laser‐Assisted Ultrasonic Nanocrystal Surface Modification on the Microstructure and Mechanical Properties of 300M Steel

Study on the role of chromium addition on sliding wear and corrosion resistance of high-manganese steel coating fabricated by wire arc additive manufacturing

Dual Nanoprecipitation and Nanoscale Chemical Heterogeneity in a Secondary Hardening Steel for Ultrahigh Strength and Large Uniform Elongation

Novel Wear-Resistant Mechanism Induced by MUPZs via RRA Process in Microalloyed High Manganese Steel

Precipitation Refinement via Aging Time Modification for Enhancing Wear Resistance in Ti–V–Nb Microalloyed High‐Manganese Steels

The effect of biomimetic laser surface treatment on the wear performance of high manganese steel

Enhanced fatigue resistance and fatigue-induced substructures in an additively manufactured CoCrNi medium-entropy alloy treated by ultrasonic surface rolling process

Compressive and Wear Properties of Al 2 O 3 p/high Manganese Steel Composites With A Spatial Lattice Architecture

Size Effect of Impact Abrasive Particles on Wear and Surface Hardening Behavior of High-Manganese Steel

Effect of different chromium contents on microstructure and two-body abrasive wear behavior of Fe-Mn-B surfacing alloys

Microstructure and Wear Behavior of Laser-Remelted High-Manganese Steel

Magnetic-assisted Ultrasonic Nanocrystal Surface Modification Induced Microstructures of Titanium Alloy

Surface wear resistance and microstructure characteristic in longitudinal–torsional ultrasonic vibration side milling of GH4169 superalloy