Abstract:The phase separation of poly(methyl methacrylate)/poly(vinyl acetate)/silica (PMMA/PVAc/SiO2) blends was investigated by optical microscope, rheology, morphological observation and Fourier transform infrared spectroscopy. Strong inter-molecular interaction between PMMA and PVAc was found by the shift of the carbonyl peak position compared to the FTIR of pure polymer and the reduction of chain entanglements inferred from the rheological curves. The addition of nano-silica led to the adsorption of chains of both polymers on the particle surfaces, which changed the inter-molecular interaction between pure PMMA and PVAc. The complex inter-molecular interaction and polymer-particle interaction resulted in the failure of time-temperature superposition over the entire temperature range. So the normalized Cole-Cole plot was proposed to analyze the phase separation process of the blend. Due to the inter-molecular interaction, the normalized Cole-Cole plot of the PMMA/PVAc blend deviates from the polymer, and secondary deviation occurs at the end of the curve during the heating process, which is the contribution of the phase interface. The nanoparticles have different influences on the phase separation behavior of the blend, depending on the blend composition. In the near-critical blends, nano-silica promoted the phase separation and was finally located at the interface of the two phases. In the off-critical blends, nano-silica had little effect on phase separation and was finally located in the island domains. The effect of nanoparticles on phase separation of different blends is related to the mechanism of phase separation: the near-critical blends form discontinuous shapes through the decomposition of the spiral nodal line. The phase separation speed is faster than the Brownian motion speed of nanoparticles, which results in the initial distribution of nano-silica in the two phases, and the subsequent movement towards the interface of two phases. The off-critical blends form island shapes through nucleation growth mechanism. Due to the slow phase separation rate, the nano-slica play the role of nuclei during the phase separation. In other words, the phase separation mechanism, Broenian motion of nanoparticles and dynamic adsorption and desorption of polymer chains on the surface of nanoparticles jointly determine the distribution of nanoparticles. Such selective location of nanoparticles determined by the phase separation mechanism supplied a new approach for the control of aggregation of nanoparticles in polymers. [GRAPHICS] .

Effect of Phase Morphology on the Reactive Blending

Chaotic Mixing and Its Application in Polymer Blending

Effects of Periodic and Non‐periodic Chaotic Mixing on Morphology Development of Immiscible Polymer Blends

Effect of Mixing Protocol on Compatibilized Polymer Blend Morphology

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Phase Behavior of Ternary Homopolymer/Gradient Copolymer Blends

Comparing the morphological evolution of reactive and nonreactive Polystyrene/Polypropylene polymer blends: Processing phase inversion

Two Antagonistic Effects of Flow/mixing on Reactive Polymer Blending

Phase Behavior and its Viscoelastic Responses of Poly(methyl methacrylate) and Poly(styrene-co-maleic anhydride) Blend Systems

Morphology And Rheology Of Polymer/Liquid Crystal Blends

Investigation on Phase Separation Kinetics of Polyolefin Blends Through Combination of Viscoelasticity and Morphology.

A rheological model for the interface of immiscible polymer melt in blending process

Study on the formation rate of gradient phase morphology in the polymer blends

Evolution of Concentration Fluctuation During Phase Separation in Polymer Blends with Viscoelastic Asymmetry

Investigation Of Phase Separation In A Partially Miscible Polymer Blend By Rheology

Rheology and Morphology of Phase-Separating Polymer Blends

Effect of Morphology/Structure on the Phase Behavior and Nonlinear Rheological Properties of NR/SBR Blends

Phase Separation Behavior of Poly(methyl methacrylate)/Poly(vinyl acetate)/Silica Blends

The Effect of Blending Sequence on Phase Morphology of Nylon 6/abs/sma Blends

Morphology Development in Multi-Component Polymer Blends: I Composition Effect on Phase Morphology in PP/PET Polymer Blends

Concept of Reactive Compatibilizer-Tracer for Discovering Interfacial Reaction and Morphology Development for In-Situ Compatibilizing Blending Processes