Abstract:This paper aims to investigate thermal behaviors of composite laminated plates with different supports under non-uniform temperature boundary conditions. The thermo-elastic solutions of temperature, displacements, and stresses for the laminated plate with arbitrary layer numbers and thickness are obtained based on the three-dimensional theory of thermoelasticity. By applying the Fourier law of heat conduction and the thermoelastic equations, the state-space equations are established by employing the temperature, heat flux, displacements, and stresses as state variables without the hypothesis of displacement form. The differential quadrature method is introduced to discretize the in-plane state variables. On the basis of the continuities of state variables at the interfaces in the laminated plate, the relationships of temperature, heat flux, displacements, and stresses between the top and bottom surfaces can be derived. By simultaneously considering temperature and mechanical boundary conditions applied to the surfaces of the laminated plate, the initial state variables for temperature, displacements, and stresses can be determined uniquely. The errors in the temperature, displacements and stresses resulting from the differential quadrature method can be eliminated by incrementally augmenting the number of sampling points in the convergence study. The accuracy of the present method is thoroughly verified by comparing the current results with both the finite element solutions and the findings reported in previous literature. Finally, the influences of surface temperature, length-to-thickness ratios, material properties, layer numbers, and support types for the distributions of the temperature field, displacements, and stresses in the laminated plate are discussed in detail.

The analysis of thermal residual stresses near the apex in bonded dissimilar materials

Logarithmic Singular Stress Field in an Interface Edge Consisting of Two Bonded Dissimilar Materials Subjected to a Concentrated Couple on Apex

Time-dependent analysis of 3D thermo-mechanical behavior of a layered half-space with anisotropic thermal diffusivity

Analysis of axisymmetric thermo-elastic problem in multilayered material with anisotropic thermal diffusivity

Fine analysis of section stress of steel strand

Flexural-Torsional Bucklinq of Cantilevers under Quasitangential and Semitangential Bending Moments: A Paradox

Plane strain and three-dimensional analyses for thermo-mechanical behavior of multilayered transversely isotropic materials

The curved bar subjected to an arbitrarily distributed loading: Another paradox in the two-dimensional theory of elasticity

An Analytical Solution of Three-Dimensional Steady Thermodynamic Analysis for a Piezoelectric Laminated Plate Using Refined Plate Theory

Three-Dimensional Analysis of Magnetoelectroelastic Rotating Circular Plate

Analytical Solutions to Magneto-Electro-elastic Beams

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Response of Dynamic Interlaminar Stresses in Laminated Plates under Free Vibration and Thermal Load

Analysis of Transient Thermal Stress in Cylindrically Orthotropic Tubes

Finite Element Analysis of Residual Stress Distribution Patterns of Prestressed Composites Considering Interphases

Theoretical Study on Residual Thermal Stresses Caused by the Brazing Process in Annular and Bilayer Structures

Thermal analysis for laminated plates with arbitrary supports under non-uniform temperature boundary conditions

STRESS ANALYSIS OF MULTIPLE SURFACE CRACKS WITH INTERACTIONS

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

THEORETICAL ANALYSIS AND EXPERIMETNAL VERIFICATION FOR PAINLEV PARADOX

Transient Thermal Stresses in an Orthotropic Hollow Cylinder for Axisymmetric Problems