Abstract:Among many catalysts for the electrochemical reduction of CO2, bimetallic materials have been paid more attention on enhanced catalytic activity and product selectivity. Sn is considered as an optional catalyst with excellent application potential due to its high selectivity for formate, low toxicity, low cost, and abundant reserves, which has been widely studied in recent years. However, the catalytic properties of cobalt–tin bimetallic composites have not been reported. In this study, we successfully synthesized the loaded Co/Sn bimetallic carbon matrix composite using the MOF template method and systematically studied the characteristics of the composite for the electrochemical catalytic reduction of CO2. It was found that the formate Faraday efficiency (FEFormate) of the electrode with 1% Co/Sn@C catalyst coating could reach 70% with the total current density of ∼5.6 mA cm–2 at a low applied potential of −0.98 V vs RHE (reversible hydrogen electrode). Studies have shown that Co element mainly in the form of alloy doped into the catalytic materials, with trace amounts of Co doping (≤1%) can effectively improve electrode conductivity properties, increase the electrochemical active site, significantly improve selectivity for formate, and enhance the hydrogen evolution reaction (HER), which leads to more Co element doping playing a negative role. Further, the electrode with carbon paper as the support has more stable electrocatalytic activity, compared to copper foil. Experiments confirmed that the desorption of active metals on the catalyst coating on the electrode surface was the critical factor leading to the decrease in catalytic performance. This brings essential implications for the deactivation of electrodes coated with metallic elements, therefore enhancing the binding ability between the active components and the catalytic surface, or uniformly dispersing the catalytically active sites should be an effective way to improve this kind of electrode life. In addition, the carbon paper-supported 1% Co/Sn@C gas diffusion electrode (GDE) coupled with an alkaline flow cell achieved a remarkable FEFormate of ∼76% and a substantial formate partial current density of ∼24 mA cm–2 at an applied potential of −0.98 V vs RHE. Electrocatalytic experiments in the flow cell for 30 h demonstrated the excellent catalytic stability of the 1% Co/Sn@C GDE during long-term electrochemical activities.

Surface-renewable Cobalt(ii) Hexacyanoferrate-Modified Graphite Organosilicate Electrode and Its Electrocatalytic Oxidation of Thiosulfate.

In Situ Fabrication of Cobalt Nanoflowers on Sulfonated and Fluorinated Poly (arylene Ether Ketone-Benzimidazole) Template Film for the Electrocatalytic Oxidation of Glucose

Co<sub>8</sub>FeS<sub>8</sub>/Fe<sub>7</sub>S<sub>8</sub>@N-doped porous carbons as highly efficient and stable electrocatalysts for oxygen evolution reaction

Co Doped MoS2 As Bifunctional Electrocatalyst for Hydrogen Evolution and Oxygen Reduction Reactions

Surface Renewable Graphite Organosilicate Composite Electrode Containing Indium(Iii) Hexacyanoferrate(Ii/Iii)

Cupric Hexacyanoferrate Nanoparticle Modified Carbon Ceramic Composite Electrodes

Renewable manganous hexacyanoferrate-modified graphite organosilicate composite electrode and its electrocatalytic oxidation of L -cysteine

Rational Design of Cobalt-Iron Selenides for Highly Efficient Electrochemical Water Oxidation

1D/2D Cobalt‐Based Nanohybrids As Electrocatalysts for Hydrogen Generation

Partial Surface Selenization of Cobalt Sulfide Microspheres for Enhancing the Hydrogen Evolution Reaction

Cobalt Disulfide Nanosphere Dispersed on Multi-Walled Carbon Nanotubes: an Efficient and Stable Electrocatalyst for Hydrogen Evolution Reaction

MOF-Mediated Fabrication of Porous 3-D Superstructure of Carbon Nanosheets Decorated with Ultrafine Cobalt Phosphide Nanoparticles for Efficient Electrocatalysis.

Modulating Electronic Structures of Bimetallic Co-Fe Sulfide Ultrathin Nanosheet Supported on g-C3N4 Promoting Electrocatalytic Hydrogen Evolution Performance

Cobalt Sulfide Nanotubes (co9s8) Decorated with Amorphous MoSx As Highly Efficient Hydrogen Evolution Electrocatalyst

In-situ fabrication of self-supported cobalt molybdenum sulphide on carbon paper for bifunctional water electrocatalysis

Facile Deposition of Cobalt Oxide Based Electrocatalyst on Low-Cost and Tin-Free Electrode for Water Splitting

Cobalt Doping in MOF-Derived Carbon-Loaded Tin Nanomaterials for Enhanced Electrocatalytic CO 2 Reduction

Sol-Gel Derived Carbon Ceramic Electrode Bulk-Modified With Tris(1,10-Phenanthroline-5,6-Dione)Iron(Ii) Hexafluorophosphate And Its Use As An Amperometric Iodate Sensor

Electrocatalysis: Ultrafine Pt Nanoparticle‐Decorated Pyrite‐Type CoS <sub>2</sub> Nanosheet Arrays Coated on Carbon Cloth as a Bifunctional Electrode for Overall Water Splitting (Adv. Energy Mater. 24/2018)

Surface Engineering of Carbon Nitride Electrode by Molecular Cobalt Species and Their Photoelectrochemical Application

Hybrid heterojunction of molybdenum disulfide/single cobalt atoms anchored nitrogen, sulfur-doped carbon nanotube/cobalt disulfide with multiple active sites for highly efficient hydrogen evolution