Abstract:Objectives:Investigating the water—rock interaction mechanism and kinetics between dolomite and silica-rich hydrothermal fluids;Discussing the effect of silica-rich hydrothermal fluids on the formation of deep carbonate hydrocarbon reservoirs.Methods:Fused silica capillary tubes were used as reaction cells.Dolomite/calcite powder and deionized water were loaded into the fused silica capillary tube,which was made from pure silica.Thus,the silica involved in the water—rock interaction was from the dissolution of the tube;The vapor phase was in situ measured using a high resolution Raman spectroscopy (LabRAM HR800) with a spectral resolution of ～ 1 cm-1 The quenched solid products were analyzed using Raman spectroscopy,micro-X-ray diffraction (D/max Rapid Ⅱ,Rigaku),field emission scanning electron microscope (Supra55,Zeiss) equipped with an energy dispersive spectrometer (Oxford Instruments,Inca X-Max 150 mm2).Results:Dolomite can react with Si-rich fluid to form talc,calcite and CO2 at temperatures above 100℃.The reaction can be described as:3CaMg(CO3)2 + 4SiO2 + H2O =Mg3(Si4O10)(OH)2 + 3CACO3 + 3CO2 The reaction was promoted by high temperature and/or lower partial pressure of CO2.In other words,high temperature and the presence of a conduit to release CO2 will promote the formation of talc;Talc and other Mg-rich silicate minerals can be used to trace the activity of silica-rich hydrothermal fluids in dolomite sequences.If silica originated from quartz/chert within the dolomite sequence,the hydrothermal alteration of dolomite by silica-rich fluids would increase the porosity of dolomite reservoirs;In the Shuotuoguole area of Tarim Basin,silica-rich hydrothermal fluids migrated upwards to the Yingshan Formation through deep faults.The interaction between the silica-rich fluids and the Sinian—Cambrian dolomite would result in the formation of talc and CO2.Then,the produced CO2 ascends to the shallow limestone sequence of Yingshan Formation and promoted the dissolution of limestone to form large amounts of pores.The precipitation of micro-quartz in the Yingshan Formation was favored by (a) decreasing temperature due to mixing between hydrothermal fluids and formation water,and (b) the presence of CO2.The results also support the view that the silica-rich hydrothermal fluids responsible for the precipitation of micro-quartz in the Shuntuoguole area were depleted in Mg.

Occurrence of Long-Chain-Alkanes and Polycyclic Aromatic Hydrocarbons (pahs) in the Thermal System of Carbonate and Sodium

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

Raman study of decomposition of Na-bearing carbonates in water fluid at high P-T parameters

Hydrothermal synthesis of long-chain hydrocarbons up to C 24 with NaHCO 3 -assisted stabilizing cobalt

Catalytic Effect of Alkali Metals on the Gasification Dissolution Reaction and Deep Reaction Behavior of Metallurgical Cokes.

High Abundance of Alkylated Diamondoids, Thiadiamondoids and Thioaromatics in Recently Discovered Sulfur-Rich LS2 Condensate in the Tarim Basin

Direct Carbon Dioxide Hydrogenation to Long-Chain Α-Olefins over FeMnK Catalysts

Experimental Studies on the Interactions between Dolomite and SiO2-rich Fluids: Implications for the Formation of Carbonate Reservoirs

The crucial role of the K+-aluminium oxide interaction in K+-promoted alumina- and hydrotalcite-based materials for CO2 sorption at high temperatures.

Amphipathic Solvent-Assisted Synthetic Strategy for Random Lamellae of the Clinoptilolites with Flower-like Morphology and Thinner Nanosheet for Adsorption and Separation of CO2 and CH4

Development of a high temperature CO2 sorbent based on hydrotalcite for a H2-rich syngas production from biomass.

CO2-Soluble Ionic Surfactants and CO2 Foams for High-Temperature and High-Salinity Sandstone Reservoirs

Coking and decoking chemistry for resource utilization of polycyclic aromatic hydrocarbons (PAHs) and low-carbon process

Synthesis of Alkali Metals Functionalized Porous Carbon for Enhanced Selective Adsorption of Carbon Dioxide: A Theoretically Guided Study

Salt-assisted surface charge driven synthesis of large pores alumina as carbon tolerance support for propane dehydrogenation

Alkali Metal CO2 Sorbents and the Resulting Metal Carbonates: Potential for Process Intensification of Sorption-Enhanced Steam Reforming

Facile Preparation of Porous CaMgAl Hydrotalcite-Like Derived Mixed Oxides through Alkaline Etching of KOH for CO2 Capture

Carbon-Supported Fe-Based Catalyst for Thermal-Catalytic CO2 Hydrogenation into C2+ Alcohols: The Effect of Carbon Support Porosity on Catalytic Performance

New insights into stabilizing mechanism of Ca9Al6O18 stabilizing Ca-based sorbents for CO2 cyclic capture under mild conditions