Abstract:Abstract The Gas Electron Multiplier (GEM) is a new age detector, which can handle the high flux of particles. The GEM foil, which is constructed using 50 μm highly insulating foil (Kapton/Apical) coated with 5 μm layers of copper, on both sides, with a network of specifically shaped holes is the major component of these detectors. The European Center for Nuclear Research (CERN) has been the sole supplier of the GEM foils until recently when a few other companies started manufacturing GEM foils under the transfer of technology (TOT) agrement from CERN. Techtra is one such company in Europe which gained a right to use CERN developed technology in order to produce commercially viable GEM foils. Micropack Pvt. Ltd. is another company in India which has successfully manufactured good quality GEM foils. Due to the microscopic structure of holes and dependence on the electric field inside, it becomes essential to study the defect and uniformity of holes along with the electrical property of foils under ambient conditions. In this work we are reporting the tests condition of Techtra GEM foils. We report on the development of a cost effective and efficient technique to study the GEM foils holes geometry, distribution, and defects. We also report on the electrical properties of these foils like leakage current, stability, and discharges. At the detector level, we describe the high voltage (HV) response, gain, uniformity, and stability. The GEMs have been proposed to have a wider applications, so we performed a feasibility study to utilize these for the imaging. We irrediated various objects of varying density with X-rays and reconstructed the images. The reconstructed image shows a good distinction between materials of different densities, which can be very useful in various applications like medical imaging or cargo imaging.

Fabricating Optimum and Quality Test of Gas Electron Multiplier Based on Chemical Etching

Investigation on the performance of a thick ceramic gas electron multiplier

Experimental Study on the Performance of A Single-Thgem Gas Detector

A perturbative determination of O(a) boundary improvement coefficients for the Schrödinger Functional coupling at 1-loop with improved gauge actions

Development of Thick-foil and Fine-pitch GEMs with a Laser Etching Technique

Preliminary Test of Thick GEM with Resistive Electrodes

A Large-Area GEM Detector Using a Novel Self-Stretching Technique

Feasibility Study of Gas Electron Multiplier Detector as an X-Ray Image Sensor

Experimental Study on the Performance of Tri-GEM Gas Detector

A study of thinner-THGEM, with some applications

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

A Readout Asic for Gem Detectors

Plasma-Based Etching Approach for GEM Detector Microfabrication at FBK for X-ray polarimetry in space

Simulations of Multi-layer GEM Systems from Single to Quadruple GEMs

Stability tests performed on the triple GEM detector built using commercially manufactured GEM foils in India

The qualification of GEM detector and its application to imaging

Light multi-GEM detector for high-resolution tracking systems

Performance Studies of Aluminium-Based Gas Electron Multiplier Detector

Study of charging up effect in a triple GEM detector

A concise review on THGEM detectors

Application of CMOS Charge-Sensitive Preamplifier in Triple-Gem Detector