Abstract:Cr(VI) as a toxic heavy metal can endanger human physical and mental health. The adsorption method has been widely used for Cr(VI) removal due to its advantages of cost-effectiveness and simplicity of operation. However, the key to Cr(VI) removal by adsorption lies in the construction of adsorption active sites. In this study, Fe 3 O 4 @COF-MT@PPy magnetic composites were prepared by the Schiff base method and in situ polymerisation to construct adsorbents with high specific surface area and abundant amino active sites for the removal of Cr(VI) from wastewater. The TEM and BET results showed that PPy was successfully encapsulated on the Fe 3 O 4 @COF-MT material, and the COF layer provided sites for the polymerisation of PPy, which resulted in a large specific surface area (400.93 m 2 /g) for Fe 3 O 4 @COF-MT@PPy, thus providing more adsorption sites. The VSM results showed that the prepared composites have good magnetic properties (13.8 emu/g) and are easy to separate from aqueous solutions. Encouragingly, the Fe 3 O 4 @COF-MT@PPy composites showed excellent adsorption performance for Cr(VI) in aqueous solution. The maximum adsorption capacity of the material for Cr(VI) was 429.18 mg/g at 298 K, which was much higher than Fe 3 O 4 @COF-MT with Fe 3 O 4 @PPy. Adsorption kinetics and isotherm analyses showed that the adsorption process was more in line with the pseudo-second-order and Langmuir models. The Fe 3 O 4 @COF-MT@PPy composites were able to maintain high adsorption capacity of Cr(VI) after five regenerations, which showed good reusability. In addition, interfering ion experiments demonstrated the selective adsorption of Fe 3 O 4 @COF-MT@PPy on Cr(VI). Using XPS for the analysis, it can be speculated that the adsorption mechanism is due to the abundant amino groups on the surface of the adsorbent firstly exerting electrostatic attraction and ion-exchange effect on the anion Cr(VI), and then the protonated amino groups reduce part of the Cr(VI) to Cr(III), and finally adsorb the Cr(III) on the surface of the material by chelation. Therefore, the recyclable Fe 3 O 4 @COF-MT@PPy has a good potential for adsorption of Cr-containing wastewater.

Study on removal of Cr (Ⅵ) from wastewater with pyrolyzed sludge residue

INTENSIFICATION OF ADSORPTION PROCESS BY USING THE PYROLYTIC CHAR FROM WASTE TIRES TO REMOVE CHROMIUM(VI) FROM WASTEWATER

Pyrolysing Wood Into Carbons For Cr(Vi) Adsorption: Performances Compared To Mineral Adsorbents

Study on the co-pyrolysis behaviors of sewage sludge and Enteromorpha prolifera and the adsorption mechanism of Cr(VI) in water using pyrolysis residue

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Adsorption-catalytic Mechanism for Pyrolytic Carbon Black from Waste Tires on Cr(Ⅵ) in Aqueous Solution

Study on Adsorption of Cr (Ⅵ) in Wastewater by Modified Brewers Grains

Preparation of a novel metal-free polypyrrole-red phosphorus adsorbent for efficient removal of Cr(VI) from aqueous solution

Polypyrrole/waste molasses composites as a superior adsorbent for highly efficient and selective removal of Cr(VI) from aqueous environments

Research on Oily Sludge Pyrolysis Residue to the Adsorption of Biologically Treated Oil-Field Wastewater

A novel sludge-based biochar composite adsorbent CS/SBC-H3PO4 for efficient Cr(VI) removal from aqueous solution

Synergistic effects of pyrolysis temperature, iron ion concentration and solid/liquid ratio on the properties and Cr(VI) removal performance of magnetic carbon

Characteristics and adsorption of Cr(VI) of biochar pyrolyzed from landfill leachate sludge

Effective Removal of Fe (III) from Strongly Acidic Wastewater by Pyridine-Modified Chitosan: Synthesis, Efficiency, and Mechanism

Insight into the synergistic adsorption-reduction character of chromium(VI) onto poly(pyrogallol-tetraethylene pentamine) microsphere in synthetic wastewater

Study on the Adsorption of Modified Peanut Shell for Cr~(6+) in Wastewater

The Removal of Cr(VI) from Aqueous Solutions with Corn Stalk Biochar

Sewage sludge derived FeCl3-activated biochars as efficient adsorbents for the treatment of toxic As(III) and Cr(VI) wastewater

The ultramicropore biochar derived from waste distiller's grains for wet-process phosphoric acid purification: Removal performance and mechanisms of Cr(VI)

The co-pyrolysis of waste urea–formaldehyde resin with pine sawdust: co-pyrolysis behavior, pyrocarbon and its adsorption performance for Cr (VI)

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks