Abstract:Biochar adsorption has emerged as a favorable and environmentally friendly approach for removing metals such as chromium (Cr) from wastewater. However, the use of pristine biochar (PBC) is limited due to its finite adsorptive capacity, selectivity, and potential for secondary pollution. In this study, a novel bifunctionalized magnetic biochar (BMBC) was fabricated by incorporating cystamine as a ligand and glutaraldehyde as a crosslinker into alkali-treated magnetic biochar (MBC). This chemical modification introduced numerous amino groups and disulfide bonds onto the surfaces of BMBC. The biochar adsorbents’ surface morphologies, crystal structures, and texture properties were characterized using SEM, XRD, and N2 adsorption-desorption techniques. The specific surface area was determined using the BET method. Furthermore, the surface functional groups and elemental compositions before and after adsorption were analyzed using FTIR and XPS, respectively. The results demonstrated higher Cr(VI) removal efficacy of BMBC (100%) than MBC (72.37%) and PBC (61.42%). Optimal conditions for Cr(VI) removal were observed at a solution pH of 2, a temperature of 50 °C, a reaction time of around 1440 min, and an initial adsorbate concentration of 300 mg/L. The sorption process followed a chemical mechanism and was controlled by monolayer adsorption, with a maximum adsorption capacity of 66.10 mg/g at 50 °C and a pH of 2, as indicated by the larger fitting values of the pseudo–second-order and Langmuir models. The positive ∆Ho and ∆So values and negative ∆G0 values suggested a spontaneous and endothermic Cr(VI) adsorption process with high randomness at the solid/liquid interface. The removal of Cr(VI) was attributed to the reduction of Cr(VI) into Cr(III) facilitated by the introduced amino acids, sulfur, and Fe(II), electrostatic interaction between Cr(VI) in the solution and positive charges on the adsorbent surface, and complexation with functional groups. The presence of co-existing cations such as Cu(II), Cd(II), Mn(II), and K(I) had little effect on Cr(VI) removal efficiency. At the same time, the co-existence of anions of Cl−, NO3−, SO42−, and HPO42− resulted in a 7.58% decrease in the Cr(VI) removal rate. After five consecutive adsorption/desorption cycles, BMBC maintained a high Cr(VI) removal rate of 61.12%. Overall, this novel BMBC derived from rice straw shows great promise as a biosorbent for treating Cr(VI) in wastewater.

Synergistic effects of pyrolysis temperature, iron ion concentration and solid/liquid ratio on the properties and Cr(VI) removal performance of magnetic carbon

Pyrolysing Wood Into Carbons For Cr(Vi) Adsorption: Performances Compared To Mineral Adsorbents

INTENSIFICATION OF ADSORPTION PROCESS BY USING THE PYROLYTIC CHAR FROM WASTE TIRES TO REMOVE CHROMIUM(VI) FROM WASTEWATER

The characterization of a novel magnetic biochar derived from sulfate-reducing sludge and its application for aqueous Cr(VI) removal through synergistic effects of adsorption and chemical reduction

Mechanism enhanced active biochar support magnetic nano zero-valent iron for efficient removal of Cr(VI) from simulated polluted water

Pyrolysis temperature and feedstock affected Cr(VI) removal capacity of sulfidated zerovalent iron: Importance of surface area and electrical conductivity

Sodium citrate and biochar synergistic improvement of nanoscale zero-valent iron composite for the removal of chromium (Ⅵ) in aqueous solutions

Influence of Synthesis Methods on the High-Efficiency Removal of Cr(VI) from Aqueous Solution by Fe-Modified Magnetic Biochars

Fabrication and characterization of magnetic eucalyptus carbon for efficient Cr(VI) removal in aqueous solution and its mechanisms

Synthesis of novel magnetic activated carbon for effective Cr(VI) removal via synergistic adsorption and chemical reduction

Chitosan Induced Synthesis of Few-Layer MoS2/Fe-doped Biochar and Its Dual Applications in Cr(VI) Removal

Simultaneous adsorption and reduction of Cr(VI) on Potamogeton·crispus biochar supported nanoscale zero-valent iron: Electro- and sepctro-chemical mechanism

Enhanced Cr(VI) removal induced by electron donor in magnetic iron-nickel sulfides biochar composites

One-step preparation of lignin-based magnetic biochar as bifunctional material for the efficient removal of Cr(VI) and Congo red: Performance and practical application

One-pot synthesis of a magnetic Zn/iron-based sludge/biochar composite for aqueous Cr(VI) adsorption

Aqueous Cr(VI) removal by biochar derived from waste mangosteen shells: Role of pyrolysis and modification on its absorption process

Application of a Novel Bifunctionalized Magnetic Biochar to Remove Cr(VI) from Wastewater: Performance and Mechanism

Chromium removal using a magnetic corncob biochar/polypyrrole composite by adsorption combined with reduction: Reaction pathway and contribution degree A Physicochemical and engineering aspects

Enhanced Cr(VI) removal by biochar-loaded zero-valent iron coupled with weak magnetic field

Efficient Removal of Cr(VI) from Wastewater by Magnetic Biochar Derived from Peanut Hull

Sustainable Chromium (VI) Removal from Contaminated Groundwater Using Nano-Magnetite-Modified Biochar via Rapid Microwave Synthesis