Abstract:Adsorption behavior of bovine serum albumin(BSA) and human fibrinogen(FGN) was studies using ellipsometry. It is shown that the final amount of adsorbed BSA is less than that of FGN at equal protein concentration when the concentration is above 5μg/ml. With changed protein concentration, the adsorption of BSA showed to be saturated at concentration of 10μg/ml(namely, the final amount of adsorbed protein does not increase further with the increase of the protein concentration) while the concentration for FGN adsorption saturation is 20μg/ml. At equal protein concentration of 30μg/ml, both the adsorption speed and the final adsorbed amount of BSA were much less than those of FGN. For the same protein FGN, the adsorption speed and the final amount of adsorbed protein at protein concentration of 30μg/ml were obviously higher than those at concentration of 7.5μg/ml. The main problem for the ellipsometric study of protein adsorption at surfaces of polymeric materials is how to get surface smoothness and reflectivity high enough for the ellipsometric measurement. In this work, a method of polymer film spreading on surface of polished silicon chips has been developed. Samples prepared by this method accorded well with requirement of the ellipsometric measurement. Using ellipsometry, the adsorption behavior of FGN onto the polyurethane surface was preliminarily studied and compared with that on hydrophilic silicon surface. It is shown that the speed of FGN adsorption onto the polyurethane film and the final amount of the adsorbed protein are much less than those onto the hydrophilic silicon surface. It suggests that the hemocompatibility of hydrophilic silicon is much lower than that of polyurethane film. | Adsorption behavior of bovine serum albumin (BSA) and human fibrinogen (FGN) was studied by using ellipsometry. It is shown that the final amount of adsorbed BSA is less than that of FGN at equal protein concentration when the concentration is above 5 μg/ml. With changed protein concentration, the adsorption of BSA is saturated at concentration of 10 μg/ml while the concentration for FGN adsorption saturation is 20 μg/ml. At equal protein concentration of 30 μg/ml, both the adsorption speed and the final adsorbed amount of BSA are much less than those of FGN. For the same protein FGN, the adsorption speed and the final amount of adsorbed protein at protein concentration of 30 μg/ml are obviously higher than those at concentration of 7.5 μg/ml. A method of polymer film spreading on surface of polished silicon chips has been developed. Samples prepared in this method accord with requirement of the ellipsometric measurement. By using ellipsometry, the adsorption behavior of FGN onto the polyurethane surface was preliminarily studied and compared with that on hydrophilic silicon surface. It is shown that the speed of FGN adsorption onto the polyurethane film and the final amount of the adsorbed protein are much less than those onto the hydrophilic silicon surface. It suggests that the hemocompatibility of hydrophilic silicon is much lower than that of polyurethane film.

Adsorption of Bovine Serum Albumin on the Surface of Medical Polyurethane Elastomer

Adsorption of IgG and BSA on Two Chromatographic Resins—Poly(ethylenimine)-4FF Resin and Tetrapeptide-poly(ethylenimine)-4FF Resin

A Viscometric Study of Adsorption of Gelatin on the Surface of Polyurethane Elastomer

Selective Adsorption of Serum Albumin on Biomedical Polyurethanes Modified by a Poly(ethylene Oxide) Coupling-Polymer with Cibacron Blue (F3G-A) Endgroups.

Selective binding of albumin on stearyl poly(ethylene oxide) coupling polymer-modified poly(ether urethane) surfaces

Coadsorption of Human Immunoglobulin G and Bovine Serum Albumin on A P-Aminohippuric Acid Based Mixed-Mode Resin

Albumin and fibrinogen adsorption on PU–PHEMA surfaces

[Quantitative Characterization of Adsorbed Bovine Serum Albumin on Modified Surfaces of Poly(ether Urethane) Materials Using ATR-FT-IR Spectroscopy].

Immobilization of bovine serum albumin onto porous polyethylene membranes using strongly attached polydopamine as a spacer.

Albumin And Fibrinogen Adsorption On Cibacron Blue F3g-A Immobilised Onto Pu-Phema (Polyurethane-Poly(Hydroxyethylmethacrylate)) Surfaces

Preparation and Characterization of Heparin-Immobilized Poly(Ether Urethanes)

Bioinspired Polycation Functionalization of the Polyurethane Surface for Enhanced Lubrication, Antibacterial Property, and Anticoagulation

ELLIPSOMETRIC STUDIES OF ALBUMIN AND FIBRINOGEN ADSORPTION ON SILICA AND POLYURETHANE FILM SURFACES

A novel urethane containing copolymer as a surface modification additive for blood contact materials

Surface Immobilization of Bioactive Molecules on Polyurethane for Promotion of Cytocompatibility to Human Endothelial Cells

Adsorption of Bovine Serum Albumin on Nano and Bulk Oxide Particles in Deionized Water.

Probing the behavior and kinetic studies of amphiphilic acrylate copolymers with bovine serum albumin

Synthesis, characterization and cell compatibility of novel poly(ester urethane)s based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) prepared by melting polymerization

Preparation, Protein Adsorption and Blood Compatibility of Polyelectrolyte Multilayers with Different Surface Properties

The polydopamine‐assisted heparin anchor enhances the hydrophilicity, hemocompatibility, and biocompatibility of polyurethane

A new insight into the adsorption of bovine serum albumin onto porous polyethylene membrane by zeta potential measurements, FTIR analyses, and AFM observations.