Abstract:BACKGROUND:Thrombus formation and neointimal hyperplasia still limit the use of small-caliber expanded poly(tetrafluoroethylene) (ePTFE) vascular prosthesis with a diameter less than 6 mm for revascularization in the coronary or peripheral circulation. Bioactive surface heparin coating is one conceivable path for above-mentioned problems.OBJECTIVE: To elevate the anticoagulant property of ePTFE, this study promoted the patency of a novel small-caliber ePTFE vascular graft by modifying its luminal surface with covalently crosslinked poly(vinyl alcohol)/ p-diazonium diphenyl amine polymer/heparin gel (PVA/PA/Hep gel) and examined the hemocompatibility of the graft.DESIGN, TIME AND SETTING: Observational experiments were performed at the Nanomedicine and Biosensor Lab,Biomedical Engineering Center, Harbin Institute of Technology from May 2006 to June 2007.MATERIALS: The ePTFE vascular grafts (diameter of 4 mm), Nafion (Naf) and Poly(vinyl alcohol) (Aldrich, USA), heparin (Mw 12 000- 14 000) (Calbiochem, USA), p-diazonium diphenyl amine polymer (PA) (this lab, China) were used in this study.METHODS: ①The vascular graft surface was firstly modified with Nafion. ②Following the impregnation of the mixture of PVA/PA/Hep, covalent crosslinking between polyvinyl alcohol and heparin was performed using crosslinker PA under ultraviolet radiation.MAIN OUTCOME MEASURES: ①Contact angles, ②Attenuated total reflection-fourier transform infrared spectroscopy (ATR-FTIR), ③Activated partial thromboplastin time (APTT) and prothromhin time (PT), ④hemolysis test, ⑤platelet adhesion test and ⑥thrombosin inactivation test.RESULTS: ①The water contact angle of the vascular graft surface was greatly decreased after modifying. ATR-FTIR revealed the disappearance of diazonium groups at 2 172 cm-1 and 2 224 cm-1. Vascular prosthesis after modifying had prolonged APTT and PT, low percent hemolysis and low amount of platelet adhesion. Modified vascular prosthesis had inhibitory effect on thrombosin activity and good coating stability.CONCLUSION: Converage of PVA/PA/Hep has good antithrombotic function and low percent hemolysis, resulting in improving hemocompatibility of vascular prosthesis.

The polydopamine‐assisted heparin anchor enhances the hydrophilicity, hemocompatibility, and biocompatibility of polyurethane

Mussel-inspired one-step adherent coating rich in amine groups for covalent immobilization of heparin: hemocompatibility, growth behaviors of vascular cells, and tissue response

Polydopamine-heparin Complex Reinforced Antithrombotic and Antimicrobial Activities of Heparinized Hydrogels for Biomedical Applications

Small-caliber expanded poly(tetrafluoroethylene) vascular prosthesis impregnated with heparin and polyvinyl alcohol gel

Ar‐H2O‐NH3 plasma grafting and polymerization of dopamine onto polytetrafluoroethylene to promote heparin immobilization

Surface Modification of PE Porous Membranes Based on the Strong Adhesion of Polydopamine and Covalent Immobilization of Heparin

Facile Preparation of Heparinized Polysulfone Membrane Assisted by Polydopamine/Polyethyleneimine Co-Deposition for Simultaneous Ldl Selectivity and Biocompatibility

Constructing a catalytical NO-generation coating on a polyurethane surface to enhance hemocompatibility and promote endothelial cell growth

Vapor-based hybrid grafting of heparin-like coating for dialysis membranes with enhanced hemocompatibility

Achieving superior anticoagulation of endothelial membrane mimetic coating by heparin grafting at zwitterionic biocompatible interfaces

Tetramethylpyrazine-derived polyurethane for improved hemocompatibility and rapid endothelialization

SELF-POLYMERIZATION OF DOPA ON POLYETHYLENE POROUS MEMBRANES AND IMMOBILIZATION OF HEPARIN

Bioinspired Polycation Functionalization of the Polyurethane Surface for Enhanced Lubrication, Antibacterial Property, and Anticoagulation

Robust fabrication of poly(lactic acid) membrane with good hemocompatibility over heparin‐mimetic graphene‐based nanosheets

SURFACE HEPARINIZATION OF POLYPROPYLENE MICROPOROUS MEMBRANES FOR SELECTIVE ADSORPTION OF LOW-DENSITY LIPOPROTEIN

Surface Immobilization of Bioactive Molecules on Polyurethane for Promotion of Cytocompatibility to Human Endothelial Cells

Surface Modification of PVDF Porous Membranes Via Poly(dopa) Coating and Heparin Immobilization

Preparation and Characterization of Heparin-Immobilized Poly(Ether Urethanes)

Decoration of Heparin and Bovine Serum Albumin on Polysulfone Membrane Assisted Via Polydopamine Strategy for Hemodialysis

Photografting of Poly(Hydroxylethyl Acrylate) Onto Porous Polyurethane Scaffolds to Improve Their Endothelial Cell Compatibility