Abstract:Free-form single-layer grid shells are not uncommon in long-span stadium roofs, airport terminals, exhibition pavilions, and shopping malls, the shapes of the grid surface are usually versatile to meet the architectural requirements. This emphasizes the importance of flexible joints that can adapt to various curvatures of the freeform structures. A design procedure and formulas are therefore proposed to underpin the application of a recently proposed prefabricated joint system. Three full-scale joints with different dimensions are tested under the combined bending and compression. Finite element models are proposed and validated against the tested results. The FE models provide good predictions against the test results in terms of the initial stiffness and ultimate capacities. Parametric studies are then carried out to verify the effectiveness of the proposed design formulas, as well as to investigate the influence of the key parameters on the load-carrying capacities of the proposed joints. A wider range of FE models, with a variety of combinations of bending and compression, are developed to validate the feasibility of the design formulas. The results demonstrate that the proposed design formulas can provide a reasonably good prediction of the joint strengths and deflection. The joint system can be easily designed, prefabricated off-site and easily assembled on-site, therefore has the potential to be applied in the construction of free-form shells.

Preliminary design of the latticed shell structures for Hangzhou Yintai Shopping Square Lighting Hall

Model Designing and Static Experimental Study on Double Inner and Outer Latticed Shell String Structure

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

Shape Determination and Static Experimental Study of Double Inner and Outer Latticed Shell String Structure

Behavior Analysis and Wind-Induced Vibration Computation of Mail Hall Roof Structure of Shenzhen Swimming and Diving Hall

Design and Stability Analysis of Single Layer Elliptical Shell-Composite Deck Slab Hybrid Structure with Large Holes

Study on Dynamic Characteristics of a New Space Latticed Shell String Structure

Introduction of architectural and structural design of roof system of Yueqing Olympic Center including a stadium and two arenas

Field measurement of wind pressure and wind-induced vibration of large-span spatial cable-truss system under strong wind or typhoon

Form and Structural Properties of a New Lattice Shell String Structure

Design and Stability Analysis of the Latticed Shell Structure Located at Yuyao Tianluoshan Relic

THE PRATICAL APPLICATION OF STRING-BOW LATTICED SHELL STRUCTURE

Stability analysis of roof structure of Zhejiang University Zijingang Gymnasium

Form-finding and static wind load analysis of the complex tensioned cable membrane structure for the Expo Axis in Shanghai

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

Behaviour and design of prefabricated connections under combined bending and compression for free-form grid structures

Design and Research of the Long-Span Truss String Structure for the Platform Canopy of Beijing North Station

Structural design on steel roof of the stadium in Nantai Lake Olympic Wetland Park

Structural design of theater platform in Shengsi Ocean Cultural Center

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Structural design on multifunction hall of Shijiazhuang International Convention and Exhibition Center