Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

DLL-Based Low Power Clock Distribution Scheme

A Clock Isolation Technique for Low Power SoC Design

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

Clock Low Power Consumption Technique in SoC Design

An Efficient Clock Tree Synthesis Method in Physical Design

Fast synthesis of low power clock trees based on register clustering

A Register Clustering Algorithm for Low Power Clock Tree Synthesis

Register Clustering Methodology for Low Power Clock Tree Synthesis.

Design of bufferless resonant clock distribution network with low power and Low skew

Design of Sequential Elements for Low Power Clocking System

Low Power Gated Clock Tree Driven Placement

A Scheduling Scheme with Dynamic Frequency Clocking and Multiple Voltages for Low Power Designs

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Implementation of a Clock Synchronization Chip Based on Time-to-digital and Digital-to-time Converters With a Shared DLL for Chip-Scale Atomic Clock

Effective Legitimate Skew Driven Clock Tree Routing

A low-power clock generator based on digital DLL for high speed pipelined ADCs

Hierarchical Design of a Low Power Standing Wave Oscillator Based Clock Distribution Network

A Novel Obstacle-Aware Multiple Fan-out Symmetrical Clock Tree Synthesis.

Design of Low-Power High-Speed Divide-by-2/3 Prescalers with Improved True Single-Phase Clock Scheme

Bufferless resonant clocking with low skew and high variation-tolerant

A Novel Low-Power and High-Speed Dual-Modulus Prescaler Based on Extended True Single-Phase Clock Logic.